Pipes & X-over Kits
-
<B> SSP-30A 3" DOWNPIPES FOR RAM AIR FACTORY HEADERS--Three bolt flange on ea side
$299.00Pair, 3" mandrel bent downpipes for Ram Air factory headers. Flanges for the manifold connection are included. Three bolt flange on each side. These pipes extend back approx 34inches to trans cross-member. Pipe are aluminized. High heat ceramic gray (as pictured) is extra 80.00. Silver is satin finish. Learn More -
SHP1-B Mandrel Bent Short Headpipes for BIG Car 65-70
$149.00PAIR, 2.5" MANDREL BENT ALUMINIZED HEADPIPES 65-70 B BODY. THESE FIT LONG BRANCH FACTORY HEADER. EXCELLENT FOR SPLICING INTO AN EXISTING SYSTEM OR PLUGGIN IN OUR X-CROSSOVER RIGHT BEHIND THESE. -
SSP-6 Pair of Short Mandrel "Splice Pipes"
$79.00These 2.5" aluminized short downpipes have correct riser height for all A-body, 2nd gen F and B&G body to use with RA dport or round port factory headers and "splice" into an existing system right after the 90 degree mandrel bend (application shown in background). Trim & expand as desired to make your connection to any existing 2.5" system. For connecting to 2.25" system you'll need (2) adapter PA-2. Learn More -
BCC-30 3.0" Ball & Cone Connectors - Aluminized
$79.00Pair, 3.0" ball&cone connectors, aluminized steel with flanges & hardware. Placed in front of mufflers, these make exhaust system removal and re-instal a snap. Make connections with up to 10 degree turn. Learn More -
BCC-25 2.5" Ball & Cone Connectors - Aluminized
$39.00Pair, 2.5" ball&cone connectors, aluminized steel with flanges & hardware. Placed in front of mufflers, these make exhaust system removal and re-instal a snap. Make connections with up to 10 degree turn. Learn More -
Head Pipes without Flanges - 2.5"
$239.00All pipes are 2.5" o.d. for Ram Air style or Long Branch style factory headers with OEM bends.Sold in pairs.
Stainless and original size 2.25" available. Call to special order. Learn More
-
Head Pipes with Flanges - 2.5"
$299.00All pipes are 2.5" o.d. for Ram Air style or Long Branch style factory headers with OEM bends.Sold in pairs.
Stainless and original size 2.25" available. Call to special order. Learn More
-
TP-XX Tail Pipes - 2.25", 2.5" or 3.0"
$179.00Tailpipes for all GM A, B, G and F & X body are either smooth-conventional bent, heavy 14 gauge aluminized "lifetime" pipes...or...2.5" or 3.0" mandrel bent tails. Mandrel bent tails for A, G, F&X bodies.State year and model in comments when ordering.
Mandrel tails in premium grade US aluminized tubing. Conventional tail in aluminized or stainless. Learn More
-
-
X-2 3" X-Crossover Kit-Round Tube
$269.003.0" X-crossover junction with 3" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.Recommended for 450+ hp applications
Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More
