Pontiac

9 Item(s)

per page

Grid  List 

Set Descending Direction
  1. MS-2 High Torque Mini-starter for Pontiac Engines - 1961-1964

    MS-2 High Torque Mini-starter for Pontiac Engines - 1961-1964

    $259.00

    Fits early engines with starter bolting to bell housing.

    Starter can be "clocked" 360 degrees providing the most clearance options available in a starter! 1-year Warranty Learn More

  2. FL-3 2-Bolt Flange for Long Branch

    FL-3 2-Bolt Flange for Long Branch

    $30.00

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits up to 2.5" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Click on photo for a comparison photo of our flange (left), original GM flange (center) and flanges from Performance Years (Right). Learn More

  3. FL-3-OS 2-Bolt Flange for Super Long Branch

    FL-3-OS 2-Bolt Flange for Super Long Branch

    $37.00

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits 3.0" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Learn More

  4. OF-1 Large Oil Filter Adapter - Big Car

    OF-1 Large Oil Filter Adapter - Big Car

    $119.00

    Re-clocks oil filter to allow clearance with header. All hardware, gaskets and instructions included. Learn More
  5. SD-1ALUM D-Port 421 Super Duty Factory Headers  MADE IN THE USA

    SD-1ALUM D-Port 421 Super Duty Factory Headers MADE IN THE USA

    $1,699.00

    Pair LH and RH 421 SD D-port Manifolds (pair manifolds only)

    Aluminum 421 SD manifolds from original pontiac tooling. Hi heat alloy aluminum. Ceramic coating recommended.

    Two versions available A-all D-port heads; B for 63 SD "980" head only.

    Fits 61-63 B-body

    Miniature starter or upside down starter is required.

    Collectors are required for each manifold.

    OPTIONAL CERAMIC COATING:
    Thermal barrier ceramic coating on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock. Learn More

  6. UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    $399.00

    This kit gives you everything you need ahead of the mufflers.

    Kit includes:
    Short mandrel bent headpipes
    Flanges
    X-over Kit
    Ball & Cone adapters
    Fit/install instructions

    Available in 2.5" or 3.0". The Ball & Cone adapters are a great feature which allow easy installation and removal making access for maintenance a cinch. It also allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

  7. UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    $799.00

    Use with Long Branch factory headers - fits all B-body '64-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF!

    All complete systems include LB flanges, hangers , your choice of mufflers (Turbo, Goerlich, or SpinTech), 6 clamps and install instructions. FB use short case mufflers only.

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

    Only superior RARE x-over components are used in our systems!

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

  8. UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    $799.00

    All complete systems include your choice of mufflers...Delta Design, Goerlich, or SpinTech. See Muffler section for detail.

    This systems includes aluminized or stainless steel, 14ga, 2.25" or 2.5" full length headpipes and tailpipes. Also included are 6 clamps and required hangers.

    Use with Long Branch or Super Long Branch factory headers - all B-body '60-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only.

    All components are made in the USA. Learn More

  9. 59-63 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower

    59-63 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower

    $379.00

    All four ball joints with attaching hardware for all Pontiac B-body (Cat/Bonne/Safari/Executive/Ventura) for maodel years 59-63. All four ball joints have forged housings (all competitors have stamped steel uppers) and come with grade 8 bolts and grease fittings. Shipping in lower 48 is 9.95. Learn More

9 Item(s)

per page

Grid  List 

Set Descending Direction