Pontiac
-
SD-1ALUM D-Port 421 Super Duty Factory Headers MADE IN THE USA
$1,699.00Pair LH and RH 421 SD D-port Manifolds (pair manifolds only)Aluminum 421 SD manifolds from original pontiac tooling. Hi heat alloy aluminum. Ceramic coating recommended.
Two versions available A-all D-port heads; B for 63 SD "980" head only.
Fits 61-63 B-body
Miniature starter or upside down starter is required.
Collectors are required for each manifold.
OPTIONAL CERAMIC COATING:
Thermal barrier ceramic coating on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock. Learn More -
59-63 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower
$379.00All four ball joints with attaching hardware for all Pontiac B-body (Cat/Bonne/Safari/Executive/Ventura) for maodel years 59-63. All four ball joints have forged housings (all competitors have stamped steel uppers) and come with grade 8 bolts and grease fittings. Shipping in lower 48 is 9.95. Learn More -
1964 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower
$379.00All four ball joints with attaching hardware for all Pontiac B-body (Cat/Bonne/Safari/Executive/Ventura) for maodel years 1964 only. All four ball joints have forged housings (all competitors have stamped steel uppers) and come with grade 8 bolts and grease fittings. Shipping in lower 48 is 9.95. Learn More -
<B> SSP-30A 3" DOWNPIPES FOR RAM AIR FACTORY HEADERS--Three bolt flange on ea side
$299.00Pair, 3" mandrel bent downpipes for Ram Air factory headers. Flanges for the manifold connection are included. Three bolt flange on each side. These pipes extend back approx 34inches to trans cross-member. Pipe are aluminized. High heat ceramic gray (as pictured) is extra 80.00. Silver is satin finish. Learn More -
X-2 3" X-Crossover Kit-Round Tube
$269.003.0" X-crossover junction with 3" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.Recommended for 450+ hp applications
Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More
-
X-1 2.5" X-Crossover Kit
$199.002.5" X-crossover junction with 2.5" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.Recommended for all applications to 450hp.
Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More
-
RA-65 RA Tripwr pan (for intake with small center carb) with Seal
$349.00This is our stamped metal tripower RA pan with black powdercoat finish. We include the correct foam seal for sealing to the hood and the small carb airhorn-adapter which allows the pan to fit small center carb applications. All US made, excellent quality and finish Learn More -
RA-66 RA Tripwr pan (for intake with large center carb...same as end carbs) with Seal
$349.00This is our stamped metal tripower RA pan with black powdercoat finish for 1966 GTO. We include the correct foam seal for sealing to the hood and installation instructions. All US made, excellent quality and finish Learn More -
A-010 67-69 FB/CAMARO TUBULAR FRONT SUSPENSION
$1,549.00TUBULAR UPPER (2) AND LOWER(2) FRONT CONTROL ARMS. CONFIGURED FOR QA-1 ALUMINUM COIL-OVERS AND BOLTS TO STOCK SPINDLE. SAVE MORE THAN 50% OF FRONT-END COMPONENT WEIGHT.QA-1 ProCoil ADJUSTABLE SHOCKS AND COILS INCLUDED COMPLETE WITH ENERGY-SUSPENSION POLYURETHANE BUSHINGS. BLACK POWDERCOAT FINISH FITS 67-69 FIREBIRD/CAMARO AND 68-79 NOVA/VENTURA Learn More
-
A-011 70-81 FB/CAMARO TUBULAR FRONT SUSPENSION
$1,549.00TUBULAR UPPER (2) AND LOWER(2) FRONT CONTROL ARMS. CONFIGURED FOR QA-1 ALUMINUM COIL-OVERS AND BOLTS TO STOCK SPINDLE. SAVE MORE THAN 50% OF FRONT-END COMPONENT WEIGHT.INCLUDES QA1 ProCoil ADJUSTABLE SHOCKS AND COILS. COMPLETE WITH ENERGY-SUSPENSION POLYURETHANE BUSHINGS. BLACK POWDERCOAT FINISH. FOR SPHERICAL BEARING UPGRADE ORDER AU-01 QUANTITY 2 FOR BOTH LOWERS. FITS 70-81FIREBIRD/CAMARO Learn More
- Category
- Year
