new ph.  847.340.9286
or online

1(800) 421-8455

Pontiac

Items 11 to 20 of 22 total

per page
Page:
  2. 1
  3. 2
  4. 3

Grid  List 

Set Descending Direction
  1. AWP-1P High Flow Aluminum Water Pump 69-81 PONTIAC

    AWP-1P High Flow Aluminum Water Pump 69-81 PONTIAC

    $189.00

    POLISHED TO BRIGHT REFLECTIVE FINISH WITH CLEAR-CERAMIC COATING...Aluminum Flowkooler water pump fits all engines with 69 or later timing cover. 11-bolt type stock offset on pump flange for correct pulley alignment. Hi flow impeller makes this pump the most efficient available! 4.5" length Comes with 2 gaskets required for install (one behind pump & one behind your plate). Click on picture for impeller view. Learn More
  2. A01-034 68-72 A-BODY ADJUSTABLE UPPER CONTROL ARMS

    A01-034 68-72 A-BODY ADJUSTABLE UPPER CONTROL ARMS

    $249.00

    PAIR, ADJUSTABLE UPPER CONTROL ARMS ALLOW FOR EASY PINION ANGLE/SUSPENSION TUNING WITHOUT REMOVING THE CONTROL ARMS. FEATURE HARDENED 4130 ROD ENDS. BLACK POWDERCOAT. Learn More
  3. 64-70 Pontiac B-body Catalina/Bonne/Safari Wagon upper Ball Joint

    64-70 Pontiac B-body Catalina/Bonne/Safari Wagon upper Ball Joint

    $72.95

    New upper ball joint for 64-70 Pontiac b-body cars...Catalina/Bonne/Executive/Safari Wagon etc. Comes with hardware as shown. Learn More
  4. A01-065 Pontiac 65-70 B-Body Rear Frame Reinforcements

    A01-065 Pontiac 65-70 B-Body Rear Frame Reinforcements

    $169.00

    PAIR, FRAME REINFORCEMENT ARMS--These brace the over-the-axle crossmember to the main frame. These connect at the control arm front bolt locations and strengthen the frame at its weakest area in GM B bodies. They are a bolt-on! High strength alloy tubular construction. Black enamel finish. Comes with grade 8 mounting bolts/locknuts. Click on image to view Reinforcement in place on frame. Learn More
  5. FL-3 2-Bolt Flange for Long Branch

    FL-3 2-Bolt Flange for Long Branch

    $30.00

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits up to 2.5" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Click on photo for a comparison photo of our flange (left), original GM flange (center) and flanges from Performance Years (Right). Learn More

  6. UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    $399.00

    This kit gives you everything you need ahead of the mufflers.

    Kit includes:
    Short mandrel bent headpipes
    Flanges
    X-over Kit
    Ball & Cone adapters
    Fit/install instructions

    Available in 2.5" or 3.0". The Ball & Cone adapters are a great feature which allow easy installation and removal making access for maintenance a cinch. It also allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

  7. OF-2 Small Oil Filter Adapter - Firebird

    OF-2 Small Oil Filter Adapter - Firebird

    $105.00

    Re-clocks oil filter to allow clearance wit header. Used for Firebird, Grand Prix and X body Ventura Long Branch applications. Our adapter has improved engineering which eliminates the 3rd gasket and metal plate that other repros must use. Includes mounting hardware, gaskets and install instructions. Learn More
  8. OF-1 Large Oil Filter Adapter - Big Car

    OF-1 Large Oil Filter Adapter - Big Car

    $119.00

    Re-clocks oil filter to allow clearance with header. All hardware, gaskets and instructions included. Learn More
  9. FL-3-OS 2-Bolt Flange for Super Long Branch

    FL-3-OS 2-Bolt Flange for Super Long Branch

    $37.00

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits 3.0" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Learn More

  10. UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    $799.00

    Use with Long Branch factory headers - fits all B-body '64-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF!

    All complete systems include LB flanges, hangers , your choice of mufflers (Turbo, Goerlich, or SpinTech), 6 clamps and install instructions. FB use short case mufflers only.

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

    Only superior RARE x-over components are used in our systems!

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

Items 11 to 20 of 22 total

per page
Page:
  2. 1
  3. 2
  4. 3

Grid  List 

Set Descending Direction
Shopping Options

Currently Shopping by:

  1. Remove This Item Year: 1969
Clear All
Model
  1. GTO/LeMans/Tempest/Grand Am/Can Am (12)
  2. Catalina/Bonneville/Executive/Star Chief/Grand Ville/Grand Prix (11)
  3. Grand Prix (10)
  4. Firebird/Trans Am (10)
  5. GTO (1)
  6. GTO/LeMans/Tempest/Grand Am (1)
Price
  1. $0.00 - $99.99 (5)
  2. $100.00 - $199.99 (6)
  3. $200.00 - $299.99 (4)
  4. $300.00 - $399.99 (2)
  5. $500.00 - $599.99 (1)
  6. $700.00 - $799.99 (2)
  7. $800.00 and above (2)
SPECIALS
Ram Air Information
Our Factory Headers
Site Design by Known Technology