Pontiac

Items 1 to 10 of 14 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. UEG-XX Ultimate "Center Section" Exhaust Kit - for all GTO and 2nd Gen. Firebird

    UEG-XX Ultimate "Center Section" Exhaust Kit - for all GTO and 2nd Gen. Firebird

    $399.00

    This kit gives you everything you need ahead of the mufflers.

    Kit includes:
    Short mandrel bent headpipes
    Ram Air 2.5" Flanges
    2.5" X-over
    Ball & Cone adapters
    Fit/install instructions

    Available in 2.5". The Ball & Cone adapters are a great feature which allow easy installation and removal for any future maintenance. It allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

  2. AWP-2  8 BOLT  HIGH FLOW WATER PUMP 64-68 PONTIAC V8

    AWP-2 8 BOLT HIGH FLOW WATER PUMP 64-68 PONTIAC V8

    $129.00

    Flowkooler water pump fits all engines with 64 or later timing cover. All new components...not a rebuilt-used- pump housing 8-bolt type stock offset on pump flange keeps correct pulley alignment. Hi flow impeller makes this pump the most efficient available! Comes with gasket required for install. Click on picture for impeller view. Learn More
  3. A01-032 GM 64-67 A-BODY GTO/LM UPPER CONTROL ARMS

    A01-032 GM 64-67 A-BODY GTO/LM UPPER CONTROL ARMS

    $149.00

    PAIR, JIG FITTED, HIGH STRENGTH TUBULAR UPPER CONTROL ARMS WITH GENUINE ENERGY-SUSPENSION BUSHINGS. FITS A-BODY: GTO/LM, CHEVELLE, 442/CUTLASS, GS/SKYLARK & B-BODY: CATALINA/BONNE, IMPALA/BELAIR, GRANDPRIX(EXC.69-70), FOR YEARS NOTED. BLACK POWDERCOAT FINISH. Learn More
  4. A01-039 64-67-A BODY REAR FRAME REINFORCEMENT

    A01-039 64-67-A BODY REAR FRAME REINFORCEMENT

    $92.50

    PAIR, FRAME REINFORCEMENT ARMS--These brace the over-the-axle crossmember to the main frame. These connect at the control arm front bolt locations and strengthen the frame at its weakest area in GM A, B and G bodies. They are a bolt-on! High strength alloy tubular construction. Black powdercoat finish. Learn More
  5. A01-030  64-67 A-BODY GTO/CHEVELLE/442  ADJ. UPPER CONTROL ARMS

    A01-030 64-67 A-BODY GTO/CHEVELLE/442 ADJ. UPPER CONTROL ARMS

    $249.00

    PAIR, ADJUSTABLE UPPER CONTROL ARMS ALLOW FOR EASY PINION ANGLE/SUSPENSION TUNING WITHOUT REMOVING THE CONTROL ARMS. FEATURE HARDENED 4130 ROD ENDS. BLACK POWDERCOAT. Learn More
  6. A01-012 GM 64-72A, 69-72 G&B-BODY LOWER CONTROL ARMS

    A01-012 GM 64-72A, 69-72 G&B-BODY LOWER CONTROL ARMS

    $179.00

    PAIR, JIG FITTED, HIGH STRENGTH TUBULAR LOWER CONTROL ARMS WITH GENUINE ENERGY-SUSPENSION BUSHINGS. COMPLETE WITH SWAY BAR CONNECTION LUGS. BLACK POWDERCOAT FINISH.

    FITS ALL GM A-BODY 64-72, GM B-BODY 69-70 ONLY AND GM G-BODY 69-72. Learn More

  7. UESYS-1 Ultimate Exhaust System - 2.5" with X-over for 64-72 GTO/LM, 70-81 FB/Trans Am

    UESYS-1 Ultimate Exhaust System - 2.5" with X-over for 64-72 GTO/LM, 70-81 FB/Trans Am

    $899.00

    Use with R/A or H/O factory headers - fits all GTO (except '74), all Firebird after '69, all Grand Prix after '69, all Big Car after '70. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF

    All complete systems includeRA flanges & your choice of mufflers (Goerlich, or SpinTech..see muffler section for details), 4 clamps & hangers & install instructions. (a word about flanges: we make the strongest and best fitting flanges in the market. Cost of poor quality is poor fit...case-in-point: the oversized flanges available from our competitors and also in aluminum. If they don't break the oversized corners may hit the frame in various applications )

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers). Mandrel bent headpipes and x-over tubes.

    Only superior RARE x-over components are used in our systems! Our X-crossover creates more torque on same car test than all the other brands which are merely 2 elbows welded together. Our X is designed by Nascar and OEM GM supplier .

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

  8. Head Pipes without Flanges - 2.5"

    Head Pipes without Flanges - 2.5"

    $239.00

    All pipes are 2.5" o.d. for Ram Air style or Long Branch style factory headers with OEM bends.

    Sold in pairs.

    Stainless and original size 2.25" available. Call to special order. Learn More

  9. Head Pipes with Flanges - 2.5"

    Head Pipes with Flanges - 2.5"

    $299.00

    All pipes are 2.5" o.d. for Ram Air style or Long Branch style factory headers with OEM bends.

    Sold in pairs.

    Stainless and original size 2.25" available. Call to special order. Learn More

  10. MS-1 High Torque Mini-starter for Pontiac Engines - 1964 and Later

    MS-1 High Torque Mini-starter for Pontiac Engines - 1964 and Later

    $239.00

    Fits 301, 326, 350, 389, 400, 421, 428, 455, and Olds V8s.

    Special install bolts are included.

    1-year Warranty. Learn More

Items 1 to 10 of 14 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction