Pontiac

Items 1 to 10 of 23 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction
  1. UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    $799.00

    All complete systems include your choice of mufflers...Delta Design, Goerlich, or SpinTech. See Muffler section for detail.

    This systems includes aluminized or stainless steel, 14ga, 2.25" or 2.5" full length headpipes and tailpipes. Also included are 6 clamps and required hangers.

    Use with Long Branch or Super Long Branch factory headers - all B-body '60-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only.

    All components are made in the USA. Learn More

  2. UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    $799.00

    Use with Long Branch factory headers - fits all B-body '64-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF!

    All complete systems include LB flanges, hangers , your choice of mufflers (Turbo, Goerlich, or SpinTech), 6 clamps and install instructions. FB use short case mufflers only.

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

    Only superior RARE x-over components are used in our systems!

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

  3. FL-3 2-Bolt Flange for Long Branch

    FL-3 2-Bolt Flange for Long Branch

    $30.00

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits up to 2.5" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Click on photo for a comparison photo of our flange (left), original GM flange (center) and flanges from Performance Years (Right). Learn More

  4. UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    $399.00

    This kit gives you everything you need ahead of the mufflers.

    Kit includes:
    Short mandrel bent headpipes
    Flanges
    X-over Kit
    Ball & Cone adapters
    Fit/install instructions

    Available in 2.5" or 3.0". The Ball & Cone adapters are a great feature which allow easy installation and removal making access for maintenance a cinch. It also allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

  5. OF-2 Small Oil Filter Adapter - Firebird

    OF-2 Small Oil Filter Adapter - Firebird

    $105.00

    Re-clocks oil filter to allow clearance wit header. Used for Firebird, Grand Prix and X body Ventura Long Branch applications. Our adapter has improved engineering which eliminates the 3rd gasket and metal plate that other repros must use. Includes mounting hardware, gaskets and install instructions. Learn More
  6. OF-1 Large Oil Filter Adapter - Big Car

    OF-1 Large Oil Filter Adapter - Big Car

    $119.00

    Re-clocks oil filter to allow clearance with header. All hardware, gaskets and instructions included. Learn More
  7. FL-3-OS 2-Bolt Flange for Super Long Branch

    FL-3-OS 2-Bolt Flange for Super Long Branch

    $37.00

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits 3.0" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Learn More

  8. AWP-1P High Flow Aluminum Water Pump 69-81 PONTIAC

    AWP-1P High Flow Aluminum Water Pump 69-81 PONTIAC

    $189.00

    POLISHED TO BRIGHT REFLECTIVE FINISH WITH CLEAR-CERAMIC COATING...Aluminum Flowkooler water pump fits all engines with 69 or later timing cover. 11-bolt type stock offset on pump flange for correct pulley alignment. Hi flow impeller makes this pump the most efficient available! 4.5" length Comes with 2 gaskets required for install (one behind pump & one behind your plate). Click on picture for impeller view. Learn More
  9. AO1-036 GM 68-72 A-BODY UPPER CONTROL ARMS

    AO1-036 GM 68-72 A-BODY UPPER CONTROL ARMS

    $149.00

    PAIR, JIG FITTED, HIGH STRENGTH TUBULAR UPPER CONTROL ARMS WITH GENUINE ENERGY-SUSPENSION BUSHINGS. FITS 68-72 GM A-BODY (GTO/LM, CHEVELLE, 442, GS). BLACK POWDERCOAT FINISH. Learn More
  10. A01-037  68-72 A-BODY REAR FRAME REINFORCEMENT

    A01-037 68-72 A-BODY REAR FRAME REINFORCEMENT

    $92.50

    PAIR, FRAME REINFORCEMENT ARMS--These brace the over-the-axle crossmember to the main frame. These connect at the control arm front bolt locations and strengthen the frame at its weakest area in GM A, B and G bodies. They are a bolt-on! High strength alloy tubular construction. Black powdercoat finish. Learn More

Items 1 to 10 of 23 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction