Pontiac

TUBULAR UPPER (2) AND LOWER(2) FRONT CONTROL ARMS. CONFIGURED FOR QA-1 ALUMINUM COIL-OVERS AND BOLTS TO STOCK SPINDLE. SAVE MORE THAN 50% OF FRONT-END COMPONENT WEIGHT.

QA-1 ProCoil ADJUSTABLE SHOCKS AND COILS INCLUDED COMPLETE WITH ENERGY-SUSPENSION POLYURETHANE BUSHINGS. BLACK POWDERCOAT FINISH FITS 67-69 FIREBIRD/CAMARO AND 68-79 NOVA/VENTURA Learn More

TUBULAR UPPER (2) AND LOWER(2) FRONT CONTROL ARMS. CONFIGURED FOR QA-1 ALUMINUM COIL-OVERS AND BOLTS TO STOCK SPINDLE. SAVE MORE THAN 50% OF FRONT-END COMPONENT WEIGHT.

INCLUDES QA1 ProCoil ADJUSTABLE SHOCKS AND COILS. COMPLETE WITH ENERGY-SUSPENSION POLYURETHANE BUSHINGS. BLACK POWDERCOAT FINISH. FOR SPHERICAL BEARING UPGRADE ORDER AU-01 QUANTITY 2 FOR BOTH LOWERS. FITS 70-81FIREBIRD/CAMARO Learn More

New front control arm+coil over kit for all GM A-body (Lemans, GTO, Cutlass, Chevelle, 69-72 Grand Prix) Made from high strength DOM tubular steel with Energy Suspension poly-bushings..all grease-able, ball joints and attaching hardware. QA1 ProCoil adjustable valving coil over shocks and springs. A simple twist-of-the-knob and you can adjust compression and rebound valving on each shock to 10 different settings. You must specify your year/model, engine and engine accessories in order comments so we can provide correct springs.

Stock or aftermarket sway bar works fine with these. Use with standard, drop or extended spindles. Upper control arm cross-shafts have stock config or "Additional Camber" config for improving built-in camber.

For Spherical Bearing upgrade (in place of lower bushings) order AU-01 quantity 2 required. Learn More

High strength tubular front control arms for 64-72 GM a-body with standard spring style. Made from DOM tubing with strength reinforcements on lowers. Lower arms configured with caster improvement to increase stability and road-feel. Billet cross-shafts provide stock or additional camber gain. Includes ball joints, EnergySuspension poly bushings and heim-joint sway bar links. Black powdercoated and fully assembled.

To upgrade to spherical bearings in place of the lower bushings order AU-01, quantity 2. Learn More

Pair LH and RH 421 SD D-port Manifolds (pair manifolds only)

Aluminum 421 SD manifolds from original pontiac tooling. Hi heat alloy aluminum. Ceramic coating recommended.

Two versions available A-all D-port heads; B for 63 SD "980" head only.

Fits 61-63 B-body

Miniature starter or upside down starter is required.

Collectors are required for each manifold.

OPTIONAL CERAMIC COATING:
Thermal barrier ceramic coating on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock. Learn More

Use with Long Branch factory headers - fits all B-body '64-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF!

All complete systems include LB flanges, hangers , your choice of mufflers (Turbo, Goerlich, or SpinTech), 6 clamps and install instructions. FB use short case mufflers only.

Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

Only superior RARE x-over components are used in our systems!

Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

All components are made in the USA. Learn More

All complete systems include your choice of mufflers...Delta Design, Goerlich, or SpinTech. See Muffler section for detail.

This systems includes aluminized or stainless steel, 14ga, 2.25" or 2.5" full length headpipes and tailpipes. Also included are 6 clamps and required hangers.

Use with Long Branch or Super Long Branch factory headers - all B-body '60-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only.

All components are made in the USA. Learn More

All complete systems include your choice of mufflers (Delta Design, Goerlich, or SpinTech...see muffler section for details), all gaskets, flanges, reducer cones when needed and install instructions.

Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers). Also includes cone adapter and flanges for connecting to your headers. Specify header collector diameter in "order comments" when checking out.

Use with aftermarket tube headers (FULL LENGTH HEADERS ONLY--for systems that work with Shortie Headers order UESYS-1).

Only superior RARE x-over components are used in our systems!

Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

All components are made in the USA. Learn More

BOOST THE TORQUE AND HP OF YOUR 05-06 GTO WITH OUR 2.5" ALUMINIZED X-OVER CAT-BACK SYSTEM. INCLUDES ALL THE INSTALL HARDWARE AND STAINLESS TIPS FOR REAR OR SIDE EXIT GTOs. HIGH-FLOW SPIN-TECH MUFFLERS GIVE AN AGGRESSIVE EXHAUST NOTE AT ALL RPMs.

SELECT TIPS AND EXIT STYLE BELOW. PLEASE NOTE YOUR YEAR IN ORDER COMMENTS. CAN BE USED ON 04 GTOs WITH DUAL CUTOUTS IN BUMPER FOR REAR EXIT WITH TIPS.

SHIPPING WT APPROX 78 LBS. Learn More