Pontiac
-
SSP-6 Pair of Short Mandrel "Splice Pipes"
$79.00These 2.5" aluminized short downpipes have correct riser height for all A-body, 2nd gen F and B&G body to use with RA dport or round port factory headers and "splice" into an existing system right after the 90 degree mandrel bend (application shown in background). Trim & expand as desired to make your connection to any existing 2.5" system. For connecting to 2.25" system you'll need (2) adapter PA-2. Learn More -
SHP1-B Mandrel Bent Short Headpipes for BIG Car 65-70
$149.00PAIR, 2.5" MANDREL BENT ALUMINIZED HEADPIPES 65-70 B BODY. THESE FIT LONG BRANCH FACTORY HEADER. EXCELLENT FOR SPLICING INTO AN EXISTING SYSTEM OR PLUGGIN IN OUR X-CROSSOVER RIGHT BEHIND THESE. -
<B> SSP-30A 3" DOWNPIPES FOR RAM AIR FACTORY HEADERS--Three bolt flange on ea side
$299.00Pair, 3" mandrel bent downpipes for Ram Air factory headers. Flanges for the manifold connection are included. Three bolt flange on each side. These pipes extend back approx 34inches to trans cross-member. Pipe are aluminized. High heat ceramic gray (as pictured) is extra 80.00. Silver is satin finish. Learn More -
BCC-30 3.0" Ball & Cone Connectors - Aluminized
$79.00Pair, 3.0" ball&cone connectors, aluminized steel with flanges & hardware. Placed in front of mufflers, these make exhaust system removal and re-instal a snap. Make connections with up to 10 degree turn. Learn More -
X-1 2.5" X-Crossover Kit
$199.002.5" X-crossover junction with 2.5" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.Recommended for all applications to 450hp.
Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More
-
X-1JCT 2.5" Junction Piece for X-1 Crossover Kit
$109.00Junction only...same junction as in our X-1 crossover kit Learn More -
SHP1-7 Mandrel Bent Short Headpipes for Long Branch
$99.00Pair, Mandrel bent short headpipes. These aluminized 2.5" short headpipes extend to trans x-over for easy splice into existing system or for exhaust x-over. These fit all Long Branch equipped Pontiacs: GP 69-72, 1st gen FB & X body72-76. Use with FL-3 flanges. -
G-1 Exhaust Gasket Set, OEM Style Stamped Metal - D-Port
$19.00Fits all D-Port heads/factory headers Learn More -
G-2P Round Port Performance Gasket Set
$35.00Round port performance gasket set (bottom). Nitro-seal® steel core with graphite facing. Excellent for bi-metal applications (alum head/iron factory header), no re-torque required. Learn More -
FL-1 3-Bolt Flange, Exact Reproduction
$22.00One required per car with RM-4 manifolds, two required on RM-1 & RM-2 applications. Will fit 2" and 2.25" pipe.A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Learn More
- Category
-
- Complete Exhaust Systems (11)
- Factory Headers (14)
- Supplies, Hdwre, Tips & Gaskets (21)
- Pipes & X-over Kits (14)
- Mufflers & Resonators (6)
- Intake, Air Cleaners, RA Kits (3)
- Billet Pulleys (13)
- Timing Covers, Valley Covers & Related (9)
- Drive Shaft Safety Loops (4)
- Mini-starters & Water Pumps (5)
- Suspension Improvement (26)
- Valve Covers, Billet Spacers and Related (2)
- Year
