Pontiac
-
-
TP-XX Tail Pipes - 2.25", 2.5" or 3.0"
$179.00Tailpipes for all GM A, B, G and F & X body are either smooth-conventional bent, heavy 14 gauge aluminized "lifetime" pipes...or...2.5" or 3.0" mandrel bent tails. Mandrel bent tails for A, G, F&X bodies.State year and model in comments when ordering.
Mandrel tails in premium grade US aluminized tubing. Conventional tail in aluminized or stainless. Learn More
-
BCC-25 2.5" Ball & Cone Connectors - Aluminized
$39.00Pair, 2.5" ball&cone connectors, aluminized steel with flanges & hardware. Placed in front of mufflers, these make exhaust system removal and re-instal a snap. Make connections with up to 10 degree turn. Learn More -
SSP-6 Pair of Short Mandrel "Splice Pipes"
$79.00These 2.5" aluminized short downpipes have correct riser height for all A-body, 2nd gen F and B&G body to use with RA dport or round port factory headers and "splice" into an existing system right after the 90 degree mandrel bend (application shown in background). Trim & expand as desired to make your connection to any existing 2.5" system. For connecting to 2.25" system you'll need (2) adapter PA-2. Learn More -
SHP1-B Mandrel Bent Short Headpipes for BIG Car 65-70
$149.00PAIR, 2.5" MANDREL BENT ALUMINIZED HEADPIPES 65-70 B BODY. THESE FIT LONG BRANCH FACTORY HEADER. EXCELLENT FOR SPLICING INTO AN EXISTING SYSTEM OR PLUGGIN IN OUR X-CROSSOVER RIGHT BEHIND THESE. -
<B> SSP-30A 3" DOWNPIPES FOR RAM AIR FACTORY HEADERS--Three bolt flange on ea side
$299.00Pair, 3" mandrel bent downpipes for Ram Air factory headers. Flanges for the manifold connection are included. Three bolt flange on each side. These pipes extend back approx 34inches to trans cross-member. Pipe are aluminized. High heat ceramic gray (as pictured) is extra 80.00. Silver is satin finish. Learn More -
BCC-30 3.0" Ball & Cone Connectors - Aluminized
$79.00Pair, 3.0" ball&cone connectors, aluminized steel with flanges & hardware. Placed in front of mufflers, these make exhaust system removal and re-instal a snap. Make connections with up to 10 degree turn. Learn More -
X-1 2.5" X-Crossover Kit
$199.002.5" X-crossover junction with 2.5" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.Recommended for all applications to 450hp.
Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More
-
X-1JCT 2.5" Junction Piece for X-1 Crossover Kit
$109.00Junction only...same junction as in our X-1 crossover kit Learn More -
SHP1-7 Mandrel Bent Short Headpipes for Long Branch
$99.00Pair, Mandrel bent short headpipes. These aluminized 2.5" short headpipes extend to trans x-over for easy splice into existing system or for exhaust x-over. These fit all Long Branch equipped Pontiacs: GP 69-72, 1st gen FB & X body72-76. Use with FL-3 flanges.
- Category
-
- Complete Exhaust Systems (11)
- Factory Headers (15)
- Supplies, Hdwre, Tips & Gaskets (21)
- Pipes & X-over Kits (14)
- Mufflers & Resonators (6)
- Intake, Air Cleaners, RA Kits (3)
- Billet Pulleys (13)
- Timing Covers, Valley Covers & Related (9)
- Drive Shaft Safety Loops (4)
- Mini-starters & Water Pumps (5)
- Suspension Improvement (29)
- Valve Covers, Billet Spacers and Related (2)
- Year
- Price
-
- $0.00 - $999.99 (126)
- $1,000.00 and above (4)
