Pontiac
-
<B> SSP-30A 3" DOWNPIPES FOR RAM AIR FACTORY HEADERS--Three bolt flange on ea side
$299.00Pair, 3" mandrel bent downpipes for Ram Air factory headers. Flanges for the manifold connection are included. Three bolt flange on each side. These pipes extend back approx 34inches to trans cross-member. Pipe are aluminized. High heat ceramic gray (as pictured) is extra 80.00. Silver is satin finish. Learn More -
X-1 2.5" X-Crossover Kit
$199.002.5" X-crossover junction with 2.5" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.Recommended for all applications to 450hp.
Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More
-
X-1JCT 2.5" Junction Piece for X-1 Crossover Kit
$109.00Junction only...same junction as in our X-1 crossover kit Learn More -
SHP1-7 Mandrel Bent Short Headpipes for Long Branch
$99.00Pair, Mandrel bent short headpipes. These aluminized 2.5" short headpipes extend to trans x-over for easy splice into existing system or for exhaust x-over. These fit all Long Branch equipped Pontiacs: GP 69-72, 1st gen FB & X body72-76. Use with FL-3 flanges. -
59-63 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower
$379.00All four ball joints with attaching hardware for all Pontiac B-body (Cat/Bonne/Safari/Executive/Ventura) for maodel years 59-63. All four ball joints have forged housings (all competitors have stamped steel uppers) and come with grade 8 bolts and grease fittings. Shipping in lower 48 is 9.95. Learn More -
A01-664 Upper Control Arms 61-64 GP, Catalina, Bonne
$189.00PAIR, JIG FITTED, HIGH STRENGTH TUBULAR UPPER CONTROL ARMS WITH GENUINE ENERGY-SUSPENSION BUSHINGS. CORRECT BUSHING BOLT/PIN SIZE FOR THIS SPECIAL APPLICATIONFITS ALL PONTIAC GRAND PRIX, CATLINA AND BONNEVILLE 1961-64. BLACK POWDERCOAT FINISH Learn More
-
A01-065 Pontiac 65-70 B-Body Rear Frame Reinforcements
$169.00PAIR, FRAME REINFORCEMENT ARMS--These brace the over-the-axle crossmember to the main frame. These connect at the control arm front bolt locations and strengthen the frame at its weakest area in GM B bodies. They are a bolt-on! High strength alloy tubular construction. Black enamel finish. Comes with grade 8 mounting bolts/locknuts. Click on image to view Reinforcement in place on frame. Learn More -
1964 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower
$379.00All four ball joints with attaching hardware for all Pontiac B-body (Cat/Bonne/Safari/Executive/Ventura) for maodel years 1964 only. All four ball joints have forged housings (all competitors have stamped steel uppers) and come with grade 8 bolts and grease fittings. Shipping in lower 48 is 9.95. Learn More -
OF-1 Large Oil Filter Adapter - Big Car
$119.00Re-clocks oil filter to allow clearance with header. All hardware, gaskets and instructions included. Learn More -
59-64 Pontiac B-body Catalina/Bonne front Lower Ball Joint
$92.55New, lower ball joint for all 59-64 Pontiac Catalina/Bonneville/Exec/Sta Wagon..2 door or 4 door. Comes with all hardware as pictured. Learn More
Shopping Options
- Category
-
- Complete Exhaust Systems (11)
- Factory Headers (15)
- Supplies, Hdwre, Tips & Gaskets (4)
- Pipes & X-over Kits (11)
- Mufflers & Resonators (4)
- Intake, Air Cleaners, RA Kits (2)
- Billet Pulleys (12)
- Timing Covers, Valley Covers & Related (2)
- Drive Shaft Safety Loops (4)
- Mini-starters & Water Pumps (3)
- Suspension Improvement (27)
- Valve Covers, Billet Spacers and Related (1)
- Year
SPECIALS
Ram Air Information