Pontiac
-
-
TP-XX Tail Pipes - 2.25", 2.5" or 3.0"
$179.00Tailpipes for all GM A, B, G and F & X body are either smooth-conventional bent, heavy 14 gauge aluminized "lifetime" pipes...or...2.5" or 3.0" mandrel bent tails. Mandrel bent tails for A, G, F&X bodies.State year and model in comments when ordering.
Mandrel tails in premium grade US aluminized tubing. Conventional tail in aluminized or stainless. Learn More
-
SHP1-B Mandrel Bent Short Headpipes for BIG Car 65-70
$149.00PAIR, 2.5" MANDREL BENT ALUMINIZED HEADPIPES 65-70 B BODY. THESE FIT LONG BRANCH FACTORY HEADER. EXCELLENT FOR SPLICING INTO AN EXISTING SYSTEM OR PLUGGIN IN OUR X-CROSSOVER RIGHT BEHIND THESE. -
<B> SSP-30A 3" DOWNPIPES FOR RAM AIR FACTORY HEADERS--Three bolt flange on ea side
$299.00Pair, 3" mandrel bent downpipes for Ram Air factory headers. Flanges for the manifold connection are included. Three bolt flange on each side. These pipes extend back approx 34inches to trans cross-member. Pipe are aluminized. High heat ceramic gray (as pictured) is extra 80.00. Silver is satin finish. Learn More -
X-1 2.5" X-Crossover Kit
$199.002.5" X-crossover junction with 2.5" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.Recommended for all applications to 450hp.
Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More
-
X-1JCT 2.5" Junction Piece for X-1 Crossover Kit
$109.00Junction only...same junction as in our X-1 crossover kit Learn More -
59-63 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower
$379.00All four ball joints with attaching hardware for all Pontiac B-body (Cat/Bonne/Safari/Executive/Ventura) for maodel years 59-63. All four ball joints have forged housings (all competitors have stamped steel uppers) and come with grade 8 bolts and grease fittings. Shipping in lower 48 is 9.95. Learn More -
A01-664 Upper Control Arms 61-64 GP, Catalina, Bonne
$189.00PAIR, JIG FITTED, HIGH STRENGTH TUBULAR UPPER CONTROL ARMS WITH GENUINE ENERGY-SUSPENSION BUSHINGS. CORRECT BUSHING BOLT/PIN SIZE FOR THIS SPECIAL APPLICATIONFITS ALL PONTIAC GRAND PRIX, CATLINA AND BONNEVILLE 1961-64. BLACK POWDERCOAT FINISH Learn More
-
A01-065 Pontiac 65-70 B-Body Rear Frame Reinforcements
$169.00PAIR, FRAME REINFORCEMENT ARMS--These brace the over-the-axle crossmember to the main frame. These connect at the control arm front bolt locations and strengthen the frame at its weakest area in GM B bodies. They are a bolt-on! High strength alloy tubular construction. Black enamel finish. Comes with grade 8 mounting bolts/locknuts. Click on image to view Reinforcement in place on frame. Learn More -
1964 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower
$379.00All four ball joints with attaching hardware for all Pontiac B-body (Cat/Bonne/Safari/Executive/Ventura) for maodel years 1964 only. All four ball joints have forged housings (all competitors have stamped steel uppers) and come with grade 8 bolts and grease fittings. Shipping in lower 48 is 9.95. Learn More