Pontiac

Items 11 to 20 of 56 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
  1. X-2 3" X-Crossover Kit-Round Tube

    X-2 3" X-Crossover Kit-Round Tube

    $269.00

    3.0" X-crossover junction with 3" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.

    Recommended for 450+ hp applications

    Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More

  2.  SSP-30A 3" DOWNPIPES FOR RAM AIR FACTORY HEADERS--Three bolt flange on ea side

    <B> SSP-30A 3" DOWNPIPES FOR RAM AIR FACTORY HEADERS--Three bolt flange on ea side

    $299.00

    Pair, 3" mandrel bent downpipes for Ram Air factory headers. Flanges for the manifold connection are included. Three bolt flange on each side. These pipes extend back approx 34inches to trans cross-member. Pipe are aluminized. High heat ceramic gray (as pictured) is extra 80.00. Silver is satin finish. Learn More
  3. X-1  2.5" X-Crossover Kit

    X-1 2.5" X-Crossover Kit

    $199.00

    2.5" X-crossover junction with 2.5" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.

    Recommended for all applications to 450hp.

    Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More

  4. 59-63 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower

    59-63 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower

    $379.00

    All four ball joints with attaching hardware for all Pontiac B-body (Cat/Bonne/Safari/Executive/Ventura) for maodel years 59-63. All four ball joints have forged housings (all competitors have stamped steel uppers) and come with grade 8 bolts and grease fittings. Shipping in lower 48 is 9.95. Learn More
  5. 1964 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower

    1964 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower

    $379.00

    All four ball joints with attaching hardware for all Pontiac B-body (Cat/Bonne/Safari/Executive/Ventura) for maodel years 1964 only. All four ball joints have forged housings (all competitors have stamped steel uppers) and come with grade 8 bolts and grease fittings. Shipping in lower 48 is 9.95. Learn More
  6. A01-030  64-67 A-BODY GTO/CHEVELLE/442  ADJ. UPPER CONTROL ARMS

    A01-030 64-67 A-BODY GTO/CHEVELLE/442 ADJ. UPPER CONTROL ARMS

    $249.00

    PAIR, ADJUSTABLE UPPER CONTROL ARMS ALLOW FOR EASY PINION ANGLE/SUSPENSION TUNING WITHOUT REMOVING THE CONTROL ARMS. FEATURE HARDENED 4130 ROD ENDS. BLACK POWDERCOAT. Learn More
  7. SD-1ALUM D-Port 421 Super Duty Factory Headers  MADE IN THE USA

    SD-1ALUM D-Port 421 Super Duty Factory Headers MADE IN THE USA

    $1,699.00

    Pair LH and RH 421 SD D-port Manifolds (pair manifolds only)

    Aluminum 421 SD manifolds from original pontiac tooling. Hi heat alloy aluminum. Ceramic coating recommended.

    Two versions available A-all D-port heads; B for 63 SD "980" head only.

    Fits 61-63 B-body

    Miniature starter or upside down starter is required.

    Collectors are required for each manifold.

    OPTIONAL CERAMIC COATING:
    Thermal barrier ceramic coating on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock. Learn More

  8. MS-1 High Torque Mini-starter for Pontiac Engines - 1964 and Later

    MS-1 High Torque Mini-starter for Pontiac Engines - 1964 and Later

    $239.00

    Fits 301, 326, 350, 389, 400, 421, 428, 455, and Olds V8s.

    Special install bolts are included.

    1-year Warranty. Learn More

  9. MS-2 High Torque Mini-starter for Pontiac Engines - 1961-1964

    MS-2 High Torque Mini-starter for Pontiac Engines - 1961-1964

    $259.00

    Fits early engines with starter bolting to bell housing.

    Starter can be "clocked" 360 degrees providing the most clearance options available in a starter! 1-year Warranty Learn More

  10. Head Pipes with Flanges - 2.5"

    Head Pipes with Flanges - 2.5"

    $299.00

    All pipes are 2.5" o.d. for Ram Air style or Long Branch style factory headers with OEM bends.

    Sold in pairs.

    Stainless and original size 2.25" available. Call to special order. Learn More

Items 11 to 20 of 56 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction