Pontiac

Items 1 to 10 of 12 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. FL-3 2-Bolt Flange for Long Branch

    FL-3 2-Bolt Flange for Long Branch

    $30.00

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits up to 2.5" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Click on photo for a comparison photo of our flange (left), original GM flange (center) and flanges from Performance Years (Right). Learn More

  2. AWP-2  8 BOLT  HIGH FLOW WATER PUMP 64-68 PONTIAC V8

    AWP-2 8 BOLT HIGH FLOW WATER PUMP 64-68 PONTIAC V8

    $129.00

    Flowkooler water pump fits all engines with 64 or later timing cover. All new components...not a rebuilt-used- pump housing 8-bolt type stock offset on pump flange keeps correct pulley alignment. Hi flow impeller makes this pump the most efficient available! Comes with gasket required for install. Click on picture for impeller view. Learn More
  3. 64-70 Pontiac B-body Catalina/Bonne/Safari Wagon upper Ball Joint

    64-70 Pontiac B-body Catalina/Bonne/Safari Wagon upper Ball Joint

    $72.95

    New upper ball joint for 64-70 Pontiac b-body cars...Catalina/Bonne/Executive/Safari Wagon etc. Comes with hardware as shown. Learn More
  4. A01-664  Upper Control Arms 61-64 GP, Catalina, Bonne

    A01-664 Upper Control Arms 61-64 GP, Catalina, Bonne

    $189.00

    PAIR, JIG FITTED, HIGH STRENGTH TUBULAR UPPER CONTROL ARMS WITH GENUINE ENERGY-SUSPENSION BUSHINGS. CORRECT BUSHING BOLT/PIN SIZE FOR THIS SPECIAL APPLICATION

    FITS ALL PONTIAC GRAND PRIX, CATLINA AND BONNEVILLE 1961-64. BLACK POWDERCOAT FINISH Learn More

  5. UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    $799.00

    All complete systems include your choice of mufflers...Delta Design, Goerlich, or SpinTech. See Muffler section for detail.

    This systems includes aluminized or stainless steel, 14ga, 2.25" or 2.5" full length headpipes and tailpipes. Also included are 6 clamps and required hangers.

    Use with Long Branch or Super Long Branch factory headers - all B-body '60-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only.

    All components are made in the USA. Learn More

  6. UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    $899.00

    Use with Long Branch factory headers - fits all B-body '64-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF!

    All complete systems include LB flanges, hangers , your choice of mufflers (Turbo, Goerlich, or SpinTech), 6 clamps and install instructions. FB use short case mufflers only.

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

    Only superior RARE x-over components are used in our systems!

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

  7. MS-2 High Torque Mini-starter for Pontiac Engines - 1961-1964

    MS-2 High Torque Mini-starter for Pontiac Engines - 1961-1964

    $259.00

    Fits early engines with starter bolting to bell housing.

    Starter can be "clocked" 360 degrees providing the most clearance options available in a starter! 1-year Warranty Learn More

  8. MS-1 High Torque Mini-starter for Pontiac Engines - 1964 and Later

    MS-1 High Torque Mini-starter for Pontiac Engines - 1964 and Later

    $239.00

    Fits 301, 326, 350, 389, 400, 421, 428, 455, and Olds V8s.

    Special install bolts are included.

    1-year Warranty. Learn More

  9. UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    $399.00

    This kit gives you everything you need ahead of the mufflers.

    Kit includes:
    Short mandrel bent headpipes
    Flanges
    X-over Kit
    Ball & Cone adapters
    Fit/install instructions

    Available in 2.5" or 3.0". The Ball & Cone adapters are a great feature which allow easy installation and removal making access for maintenance a cinch. It also allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

  10. OF-1 Large Oil Filter Adapter - Big Car

    OF-1 Large Oil Filter Adapter - Big Car

    $119.00

    Re-clocks oil filter to allow clearance with header. All hardware, gaskets and instructions included. Learn More

Items 1 to 10 of 12 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction