Oldsmobile

Items 11 to 20 of 48 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. 1st Stop...MUFFLER ADVISORY & SOUND CLIPS

    1st Stop...MUFFLER ADVISORY & SOUND CLIPS

    $0.00

    Muffler Advisory...WE MAKE CHOOSING THE RIGHT MUFFLER FOR YOUR APPLICATION EASY WITH PRACTICAL, RESEARCH-BASED RECOMENDATIONS.

    ZERO-HORSEPOWER LOSS! Our muffler offering is based on the goal of zero or minimal horsepower loss (compared to open headers/pipes). We achieve this with our Xcrossover systems and our high flow mufflers. You'll notice that we don't offer reverse-flow or "chambered" type mufflers. Chambered mufflers are poor flowing, excessively noisy, cause resonance in the car and COST YOU POWER! Of course, if you want original/replacement mufflers for resto or least exhaust noise we have those too. Very common sizes...Our standard case lengths "Short" (12-13" case) and "Long" (16-18")

    Exhaust Sound Levels: Numerous factors drive noise levels- pipe size, muffler baffle style, engine compression, termination point of exhaust system. Our SPINTECH and GOERLICH muffler options with mild-to-wild sound levels while providing more fit options & special configuration mufflers than all other suppliers. We rate sound levels on a 10 scale with 5 being a "stock" type muffler of the 60s muscle and 10 being a loud/very-aggressive level. Our mufflers don't have any raspiness or echo-ing nuisance typical with chambered mufflers.

    Muffler Flow Rates: We've selected Goerlich XLerator mufflers & SPINTECH mufflers because of their outstanding flow rates with surprisingly moderate, yet aggressive tone. The typical chambered muffler ie. Flowmaster or common turbo muffler will have flow rates 25 to 60% less than our mufflers (comparing flow data of similar case length and inlet/outlet sizes ).

    Typical applications (muffler options in our systems): 12" Spintech or 14" Goerlich--The smaller case length fit all applications. Very popular for GM-F body, GM-A body, GM-B body and Mopar B&E body, Ford Mustang and Torino.

    16" Spintech and 18" Goerlich--Quieter sound levels than shorter case but still aggressive, bass oriented note. Usually best choice for all convertible applications. For lowered /low ground clearance our 3" and 2" case height mufflers are recommended. All GM-A and B body, Mopar B body, Ford mid and full size. GM F body-16" case length (max fit length)

    Sound/video clips of lowered customer car with our 3" oval system & Spintech 16" mufflers: http://www.youtube.com/watch?v=ZIdkCxeVsTY http://www.youtube.com/watch?v=O-yocbg0DKE http://www.youtube.com/watch?v=yBtCVSTrmF0 Learn More

  2. X123 Goerlich XLerator Long Case Performance Muffler - 3.0" Inlet/Outlet

    X123 Goerlich XLerator Long Case Performance Muffler - 3.0" Inlet/Outlet

    $95.00

    All welded and aluminized performance muffler. Highest flow rating of all performance mufflers. No raspi-ness or annoying resonance. All RPM agressive exhaust note. Approx 10 db quieter than same case length Flowmaster.

    Same as X111 with longer 18" Case
    3" Inlet/Outlet, offset-offset for correct oem type fit.
    Noise rating 7.0 on 10 scale. Learn More

  3. TP-RES Resonator

    TP-RES Resonator

    $45.00

    2.5"pipe size / 3.5" Diameter / 12" Length round case. Aluminized with welded ends.

    2.25" also available--denote size needed in order comments Learn More

  4. X122 Goerlich XLerator Long Case Performance Muffler - 2.5" Inlet/Outlet

    X122 Goerlich XLerator Long Case Performance Muffler - 2.5" Inlet/Outlet

    $95.00

    All welded and aluminized performance muffler. Highest flow rating of all performance mufflers. No raspi-ness or annoying resonance. All RPM agressive exhaust note. Approx 10 db quieter than same case length Flowmaster.

    Same as X110 with longer 18" Case
    2.5" Inlet/Outlet, offset-offset for correct oem type fit.
    Noise rating 7.0 on 10 scale. Learn More

  5. X111 Goerlich XLerator Performance Muffler - 3.0" Inlet/Outlet

    X111 Goerlich XLerator Performance Muffler - 3.0" Inlet/Outlet

    $85.00

    All welded and aluminized performance muffler. Highest flow rating of all performance mufflers. No raspi-ness or annoying resonance. All RPM agressive exhaust note. Approx 10 db quieter than Flowmaster 40 series.

    3.0" Inlet/Outlet
    Noise rating 7.5 on 10 scale. Learn More

  6. X110 Goerlich XLerator Performance Muffler - 2.5" Inlet/Outlet

    X110 Goerlich XLerator Performance Muffler - 2.5" Inlet/Outlet

    $85.00

    All welded and aluminized performance muffler. Highest flow rating of all performance mufflers. No raspi-ness or annoying resonance. All RPM agressive exhaust note. Approx 10 db quieter than Flowmaster 40 series.

    2.5" Inlet/Outlet
    Noise rating 7.5 on 10 scale. Learn More

  7. HO-1SS STAINLESS OLDS MANIFOLD BOLT/STUD KIT

    HO-1SS STAINLESS OLDS MANIFOLD BOLT/STUD KIT

    $22.00

    COMPLETE BOLT KIT FOR ONE ENGINE. NATURAL STAINLESS BOLT AND STUD KIT WITH STAINLESS LOCK WASHERS. Learn More
  8. HO-1 BOLT & STUD KIT FOR W/Z OLD MANIFOLDS

    HO-1 BOLT & STUD KIT FOR W/Z OLD MANIFOLDS

    $14.00

    COMPLETE BOLT KIT FOR ONE ENGINE. GRADE 8 BOLT AND STUD KIT WITH STAINLESS LOCK WASHERS. Learn More
  9. GO-2P Olds STEEL CLAD HEADER GASKETS

    GO-2P Olds STEEL CLAD HEADER GASKETS

    $35.00

    PRICE PER PAIR, EXCELLENT SEALING PERFORMANCE WITH STEEL CLAD COMPOSITION WITH MOLY COATING. USE WITH CHALLENGING TUBE HEADER APPLICATIONS. Learn More
  10. GO-1P Olds GRAPHITE COATED EXHAUST MANIFOLD GASKETS

    GO-1P Olds GRAPHITE COATED EXHAUST MANIFOLD GASKETS

    $29.00

    PRICE PER PAIR, EXCELLENT SEALING PERFORMANCE WITH LONG LASTING STEEL CORE. USE WITH ALL MANIFOLD AND LESS CHALLENGING TUBE HEADERS. Learn More

Items 11 to 20 of 48 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction