Suspension Improvement

Suspension Improvement

Items 1 to 10 of 26 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. A01-012 GM 64-72A, 69-72 G&B-BODY LOWER CONTROL ARMS

    A01-012 GM 64-72A, 69-72 G&B-BODY LOWER CONTROL ARMS

    $179.00

    PAIR, JIG FITTED, HIGH STRENGTH TUBULAR LOWER CONTROL ARMS WITH GENUINE ENERGY-SUSPENSION BUSHINGS. COMPLETE WITH SWAY BAR CONNECTION LUGS. BLACK POWDERCOAT FINISH.

    FITS ALL GM A-BODY 64-72, GM B-BODY 69-70 ONLY AND GM G-BODY 69-72. Learn More

  2. A01-063 Y-BRACE FOR 2ND GEN FIRBIRD/CAMARO

    A01-063 Y-BRACE FOR 2ND GEN FIRBIRD/CAMARO

    $185.00

    THIS KIT IMPROVES FRONT END STABILITY AND ELIMINATES CHASSIS FLEX BY BRACING FRAME-TO-FIREWALL ON 70-81 FIREBIRD & CAMARO.

    BOLT-IN HARDWARE AND INSTALL INSTRUCTIONS INCLUDED WITH THE 2 Y-BRACES.

    CLICK ON PHOTO FOR VIEW OF INSTALLED BRACE. Learn More

  3. SSB-1 & SSB-2  SOLID BODY BUSHING KITS

    SSB-1 & SSB-2 SOLID BODY BUSHING KITS

    $99.00

    Aluminum Solid Body Bushing kits for '67-81 GM F-body (Firebird & Camaro) and '71-76 X-body (Nova & Ventura) vehicles. Use with subframe connectors to gain "stiff chassis" vehicle response by eliminating body-flex allowed by rubber mounts.

    Unlike other solid mount kits, ours have a steel inner locating sleeve which gives greater strength while allowing you to maintain stock body location or lowering on frame .5" or "wedge" mounting. Comes with all mounting hardware and instructions. Available in natural aluminum finish or black anodized.

    SSB-1 Silver-Aluminum finish bushings-- F&X bodymount Kit

    SSB-2 Black Anodized finish bushing--F&X bodymount kit Learn More

  4. Subframe Connector Kits

    Subframe Connector Kits

    $229.00

    Our subframe connector kits are precision formed to ensure excellent fit with the undercarriage of your car and are compatable with stock exhaust/fuel line/brake line pathing.

    All install hardware (grade 8) is included; these can be welded as well! Connectors are provided with tough black powdercoated finish. Instructions included. Solid body bushings are recommended for first and second gen applications. Our bushing kits are listed in this category. Learn More

  5. F-BODY ADJUSTABLE TORQUE ARMS

    F-BODY ADJUSTABLE TORQUE ARMS

    $329.00

    Our Bolt-on torque arm improves traction and increases acceleration and deceleration stability. Adjustment feature allows you to adjust pinion angle. Steel plate cradle fits snugly into trans tunnel and replaces factory rubber mount. At the strip, these should result in marked improvement in 60' times.

    Two versions: 82-92 Camaro/Firebird and 93-02 Camaro/Firebird...specify year in order comments

    tough black powdercoat finish Learn More

  6. A01-001  F-Body Rear Sway Bar Mounts

    A01-001 F-Body Rear Sway Bar Mounts

    $133.00

    Super duty rear sway bar mounts kit with rear mounting links, polyurethane bushings and mounting hardware. For 3/4", 7/8" and 1" sway bar applications... State your bar diameter in order comments. Fits 70-81 Camaro & Firebird. Black powdercoat finish. Learn More
  7. A01-077 67-81 CAMARO/FIREBIRD TIE-ROD SLEEVES

    A01-077 67-81 CAMARO/FIREBIRD TIE-ROD SLEEVES

    $69.00

    PAIR, SUPER DUTY TIE-ROD SLEEVES AND NUTS. RIGID AND SEAMLESS TIE-ROD SLEEVES. NOT ONLY INCREASE RELIABILITY OVER STAMPED OEM STYLE SLEEVES BUT ADDS A SMOOTH/CLEAN LOOK TO WHAT USUALLY APPREARS ROUGH. Learn More
  8. A01-840 STRONG-ARM F-BODY (FIREBIRD, CAMARO)  1.25" FRONT STABILIZER BAR KIT

    A01-840 STRONG-ARM F-BODY (FIREBIRD, CAMARO) 1.25" FRONT STABILIZER BAR KIT

    $189.00

    NEW! 1.25" diameter front stabilizer bar for all second gen (70-81) Firebird, TAs and Camaros. Stronger bar than stock and comes complete with polyurethane mounting bushings and polyurethane/grade 8 link kits. Stabilizer bar finish is low gloss black powdercoat. Learn More
  9. A01-839  STRONG-ARM A-BODY (GTO, 442, CHEVELLE, GS) 1.25" FR STABILIZER BAR KIT

    A01-839 STRONG-ARM A-BODY (GTO, 442, CHEVELLE, GS) 1.25" FR STABILIZER BAR KIT

    $189.00

    NEW! 1.25" diameter front stabilizer bar for all GM A-body vehicles, 1964-1972. Stronger bar than stock and comes complete with polyurethane mounting bushings and polyurethane/grade 8 link kits. Stabilizer bar finish is low gloss black powdercoat. Learn More
  10. A-064 GM-A body (GTO, Chevelle, Olds 442) Tubular Front Suspension w/Coil Over shocks

    A-064 GM-A body (GTO, Chevelle, Olds 442) Tubular Front Suspension w/Coil Over shocks

    $1,449.00

    New front control arm+coil over kit for all GM A-body (Lemans, GTO, Cutlass, Chevelle, 69-72 Grand Prix) Made from high strength DOM tubular steel with Energy Suspension poly-bushings..all grease-able, ball joints and attaching hardware. QA1 ProCoil adjustable valving coil over shocks and springs. A simple twist-of-the-knob and you can adjust compression and rebound valving on each shock to 10 different settings. You must specify your year/model, engine and engine accessories in order comments so we can provide correct springs. Stock or aftermarket sway bar works fine with these. Upper control arm cross-shafts have stock config or "Additional Camber" config for improving built-in camber. Learn More

Items 1 to 10 of 26 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction