Chevy

SELECT YOUR OWN CUSTOM BIG TUBE EXHAUST SYSTEM FOR ANY CHEVY A-BODY(CHEVELLE/MALIBU 65-75) , B-Body 65-70 or Camaro 67-81...CHOOSE 3" OR 3.5" SIZES, ALSO, SELECT MUFFLERS AND SELECT TAILPIPE SIZE. ALL ALUMINIZED! ALL MANDREL BENDS!

OUR X-CROSSOVERS OUTPERFORM ALL OTHERS ON THE DYNO AND ON THE STREET.

ALL SYSTEMS INCLUDE HEADER REDUCER CONES, FLANGES, BALL&CONE CONNECTORS(ROUND TUBE SYSTEMS ONLY) AND 4 CLAMPS. BE SURE TO MENTION YOUR HEADER COLLECTOR DIA. & YR/MODEL IN ORDER COMMENTS. Learn More

For your A, F, B -BODY BIG BLOCK CHEVY (65-75 CHEVELLE, 65-75 IMPALA, 67-81 CAMARO, 66-77 NOVA)...Our 2.5" Exhaust System which includes our RARE x-over bolts to your big block manifolds. Our crossovers return the highest performance gain delivering significant improvement in low & mid-range torque.

System comes with "ball & cone" connectors which are quick release joints and allow you to easily drop the center section of your exhaust for access to trans/shifter or simply to custom coat or paint your exhaust system.

Includes mandrel downpipes & flanges to bolt up to your manifolds/fact. headers, your choice of mufflers, conventional or mandrel bent tailpipes(conventional tails only for big car/Impala), clamps and hangers. State your year and model in comments. Camaro/Nova-long case mufflers will not fit, choose any of the short case, Delta, X110 or 3334. Learn More

For your Chevy (65-75) with Tube Headers. Specify either A-body(chevelle), B-body(impala) F-body (camaro) or X-body(nova) in comments. Complete exhaust System which includes our RARE x-over. Our crossovers return the highest performance gain delivering significant improvement in low & mid-range torque.

System comes with "ball & cone" connectors which are quick release joints and allow you to easily drop the center section of your exhaust for access or simply custom coating or painting your exhaust.

Includes Header reducer cones (3" to 2.5") your choice of mufflers SpinTech, Goerlich or Delta, mandrel bent tailpipes (exc B-body), clamps and flange hardware. Learn More

Ultimate exhaust for 67-69 Camaro Convertible with our X-crossover which fits above the X-brace. No need to lower the brace and give up valuable strength & ground clearance. Includes downpipes for Big Block manifolds and ball&cone connections that install in the front of each muffler so the system can easily be removed and reinstalled. Mandrel bent tails go all the way to the rear. If you want tails that turn-down behind rear tire state your preference in order comments. All American made Lifetime warranty. Comes with easy to use rod hangers, clamps and instructions. Welding is recommended.

Mufflers that fit in this system are listed below. Best fit are the 3334F Spin Tech as it is only 3" tall which maximizes ground clearance. Other muffler options are 4" tall. Learn More

New front control arm+coil over kit for all GM A-body (Lemans, GTO, Cutlass, Chevelle, 69-72 Grand Prix) Made from high strength DOM tubular steel with Energy Suspension poly-bushings..all grease-able, ball joints and attaching hardware. QA1 ProCoil adjustable valving coil over shocks and springs. A simple twist-of-the-knob and you can adjust compression and rebound valving on each shock to 10 different settings. You must specify your year/model, engine and engine accessories in order comments so we can provide correct springs. Stock or aftermarket sway bar works fine with these. Upper control arm cross-shafts have stock config or "Additional Camber" config for improving built-in camber. Learn More

High strength tubular front control arms for 64-72 GM a-body with standard spring style. Made from DOM tubing with strength reinforcements on lowers. Lower arms configured with caster improvement to increase stability and road-feel. Billet cross-shafts provide stock or additional camber gain. Includes ball joints, EnergySuspension poly bushings and heim-joint sway bar links. Black powdercoated and fully assembled.

To upgrade to spherical bearings in place of the lower bushings order AU-01, quantity 2. Learn More

TUBULAR UPPER (2) AND LOWER(2) FRONT CONTROL ARMS. CONFIGURED FOR QA-1 ALUMINUM COIL-OVERS AND BOLTS TO STOCK SPINDLE. SAVE MORE THAN 50% OF FRONT-END COMPONENT WEIGHT.

QA-1 ProCoil ADJUSTABLE SHOCKS AND COILS INCLUDED COMPLETE WITH ENERGY-SUSPENSION POLYURETHANE BUSHINGS. BLACK POWDERCOAT FINISH FITS 67-69 FIREBIRD/CAMARO AND 68-79 NOVA/VENTURA Learn More