Buick

Items 1 to 10 of 37 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction
  1. UBH-25  2.5" MANDREL EXH SYSTEM WITH RARE X-OVER

    UBH-25 2.5" MANDREL EXH SYSTEM WITH RARE X-OVER

    $529.00

    For your A-body Buick (65-75) with Tube Headers...Our 2.5" Exhaust System which includes our RARE x-over. Our crossovers return the highest performance gain delivering significant improvement in low & mid-range torque.

    System comes with "ball & cone" connectors which are quick release joints and allow you to easily drop the center section of your exhaust for access or simply custom coating or painting your exhaust.

    Includes Header reducer cones (3" to 2.5") your choice of mufflers SpinTech, Goerlich or Delta, mandrel bent tailpipes, clamps and flange hardware. Learn More

  2. UBH-30 BUICK A-BODY 3" & 3.5" SYSTEM WITH R.A.R.E. X-OVER

    UBH-30 BUICK A-BODY 3" & 3.5" SYSTEM WITH R.A.R.E. X-OVER

    $549.00

    SELECT YOUR OWN CUSTOM BIG TUBE EXHAUST SYSTEM FOR ANY BUICK A-BODY ...CHOOSE 3" OR 3.5" SIZES, MUFFLERS AND SELECT TAILPIPE SIZE. ALL ALUMINIZED! ALL MANDREL BENDS!

    OUR X-CROSSOVERS OUTPERFORM ALL OTHERS ON THE DYNO AND ON THE STREET.

    ALL SYSTEMS INCLUDE HEADER REDUCER CONES, FLANGES, BALL&CONE CONNECTORS(ROUND TUBE SYSTEMS ONLY) AND 4 CLAMPS. BE SURE TO MENTION YOUR HEADER COLLECTOR DIA. IN ORDER COMMENTS. Learn More

  3. XBH-25  2.5" MANDREL EXH SYSTEM WITH RARE X-OVER(for Manifolds)

    XBH-25 2.5" MANDREL EXH SYSTEM WITH RARE X-OVER(for Manifolds)

    $599.00

    For your A-body Buick (65-75) with factory manifolds...Our 2.5" Exhaust System which includes our RARE x-over. Our crossovers return the highest performance gain delivering significant improvement in low & mid-range torque.

    System comes with "ball & cone" connectors which are quick release joints and allow you to easily drop the center section of your exhaust for access or simply custom coating or painting your exhaust.

    Includes mandrel downpipes, your choice of mufflers: SpinTech, Goerlich or Delta, mandrel bent tailpipes, clamps and flange hardware. Learn More

  4. BCC-30  3.0" Ball & Cone Connectors - Aluminized

    BCC-30  3.0" Ball & Cone Connectors - Aluminized

    $79.00

    Pair, 3.0" ball&cone connectors, aluminized steel with flanges & hardware. Placed in front of mufflers, these make exhaust system removal and re-instal a snap. Make connections with up to 10 degree turn. Learn More
  5. BCC-25 2.5" Ball & Cone Connectors - Aluminized

    BCC-25 2.5" Ball & Cone Connectors - Aluminized

    $39.00

    Pair, 2.5" ball&cone connectors, aluminized steel with flanges & hardware. Placed in front of mufflers, these make exhaust system removal and re-instal a snap. Make connections with up to 10 degree turn. Learn More
  6. X-2 3" X-Crossover Kit-Round Tube

    X-2 3" X-Crossover Kit-Round Tube

    $269.00

    3.0" X-crossover junction with 3" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.

    Recommended for 450+ hp applications

    Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More

  7. X-1  2.5" X-Crossover Kit

    X-1 2.5" X-Crossover Kit

    $199.00

    2.5" X-crossover junction with 2.5" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.

    Recommended for all applications to 450hp.

    Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More

  8. 1st Stop...MUFFLER ADVISORY & SOUND CLIPS

    1st Stop...MUFFLER ADVISORY & SOUND CLIPS

    $0.00

    Muffler Advisory...WE MAKE CHOOSING THE RIGHT MUFFLER FOR YOUR APPLICATION EASY WITH PRACTICAL, RESEARCH-BASED RECOMENDATIONS.

    ZERO-HORSEPOWER LOSS! Our muffler offering is based on the goal of zero or minimal horsepower loss (compared to open headers/pipes). We achieve this with our Xcrossover systems and our high flow mufflers. You'll notice that we don't offer reverse-flow or "chambered" type mufflers. Chambered mufflers are poor flowing, excessively noisy, cause resonance in the car and COST YOU POWER! Of course, if you want original/replacement mufflers for resto or least exhaust noise we have those too. Very common sizes...Our standard case lengths "Short" (12-13" case) and "Long" (16-18")

    Exhaust Sound Levels: Numerous factors drive noise levels- pipe size, muffler baffle style, engine compression, termination point of exhaust system. Our SPINTECH and GOERLICH muffler options with mild-to-wild sound levels while providing more fit options & special configuration mufflers than all other suppliers. We rate sound levels on a 10 scale with 5 being a "stock" type muffler of the 60s muscle and 10 being a loud/very-aggressive level. Our mufflers don't have any raspiness or echo-ing nuisance typical with chambered mufflers.

    Muffler Flow Rates: We've selected Goerlich XLerator mufflers & SPINTECH mufflers because of their outstanding flow rates with surprisingly moderate, yet aggressive tone. The typical chambered muffler ie. Flowmaster or common turbo muffler will have flow rates 25 to 60% less than our mufflers (comparing flow data of similar case length and inlet/outlet sizes ).

    Typical applications (muffler options in our systems): 12" Spintech or 14" Goerlich--The smaller case length fit all applications. Very popular for GM-F body, GM-A body, GM-B body and Mopar B&E body, Ford Mustang and Torino.

    16" Spintech and 18" Goerlich--Quieter sound levels than shorter case but still aggressive, bass oriented note. Usually best choice for all convertible applications. For lowered /low ground clearance our 3" and 2" case height mufflers are recommended. All GM-A and B body, Mopar B body, Ford mid and full size. GM F body-16" case length (max fit length)

    Sound/video clips of lowered customer car with our 3" oval system & Spintech 16" mufflers: http://www.youtube.com/watch?v=ZIdkCxeVsTY http://www.youtube.com/watch?v=O-yocbg0DKE http://www.youtube.com/watch?v=yBtCVSTrmF0 Learn More

  9. X123 Goerlich XLerator Long Case Performance Muffler - 3.0" Inlet/Outlet

    X123 Goerlich XLerator Long Case Performance Muffler - 3.0" Inlet/Outlet

    $95.00

    All welded and aluminized performance muffler. Highest flow rating of all performance mufflers. No raspi-ness or annoying resonance. All RPM agressive exhaust note. Approx 10 db quieter than same case length Flowmaster.

    Same as X111 with longer 18" Case
    3" Inlet/Outlet, offset-offset for correct oem type fit.
    Noise rating 7.0 on 10 scale. Learn More

  10. TP-RES Resonator

    TP-RES Resonator

    $45.00

    2.5"pipe size / 3.5" Diameter / 12" Length round case. Aluminized with welded ends.

    2.25" also available--denote size needed in order comments Learn More

Items 1 to 10 of 37 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction