Supplies, Hdwre, Tips & Gaskets

Supplies, Hdwre, Tips & Gaskets

Items 1 to 10 of 23 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction
  1. FL-1 3-Bolt Flange, Exact Reproduction

    FL-1 3-Bolt Flange, Exact Reproduction

    $20.00

    One required per car with RM-4 manifolds, two required on RM-1 & RM-2 applications. Will fit 2" and 2.25" pipe.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Learn More

  2. H-5 and H-5SS Long Branch D-Port Installation Hardware Kit

    H-5 and H-5SS Long Branch D-Port Installation Hardware Kit

    $26.00

    Contains all bolts/washers for both sides. Bolts are zinc plated grade 8, stainless lock washers.

    Available in Yellow Zinc Coat or Polished Stainless Steel. Learn More

  3. 765-2568 Permatex Anti-seize Compound

    765-2568 Permatex Anti-seize Compound

    $4.99

    recommended to treat all threads to ensure problem free disassembly if ever required. A 1 oz. tube should handle all hardware for your car. Learn More
  4. 765-1135 Permatex Hi-temp RTV Sealer

    765-1135 Permatex Hi-temp RTV Sealer

    $7.99

    Used to ensure gasket sealing, flared headpipe joint to header collector seal, etc. Learn More
  5. 2.5" Stainless Band Clamp w/ gde 8 hdwre

    2.5" Stainless Band Clamp w/ gde 8 hdwre

    $10.49

    Stainless steel band clamps (Made in the USA), excellent quality and strong joint sealing. Comes with grade 8 hardware. Learn More
  6. HANG-1 Exhaust Hanger

    HANG-1 Exhaust Hanger

    $6.59

    These hangers are universal strap design that can be used at all locations. Heavy duty gauge material.

    Most applications require on ehanger at rear of each muffler and near end of each tailpipe.

    Made in the USA

    Use with 2.25" - 3.5" tubes. Learn More

  7. SD-1COLL Cast Iron Collectors, Pair

    SD-1COLL Cast Iron Collectors, Pair

    $300.00

    One pair of exact reproduction of cast iron SD collectors, complete with all gaskets, pipe flanges, and "dump" cover. Learn More
  8. HW-1 Original GM Folding Tab Lockwashers

    HW-1 Original GM Folding Tab Lockwashers

    $2.25

    A Restoration MUST! Usually 3 used per exhaust manifold--center bolt and end bolts. Learn More
  9. G-1P D-Port Performance Gasket Set

    G-1P D-Port Performance Gasket Set

    $29.00

    D-port performance gasket set (top).  Nitro-seal®, steel core with graphite facing.  Excellent for bi-metal applications (alum head/iron factory header), no re-torque required. Learn More
  10. G-2P Round Port Performance Gasket Set

    G-2P Round Port Performance Gasket Set

    $29.00

    Round port performance gasket set (bottom).  Nitro-seal® steel core with graphite facing.  Excellent for bi-metal applications (alum head/iron factory header), no re-torque required. Learn More

Items 1 to 10 of 23 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction