Pontiac

Items 1 to 10 of 195 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. UESYS-1 Ultimate Exhaust System - 2.5" with X-over for 64-72 GTO/LM, 70-81 FB/Trans Am

    UESYS-1 Ultimate Exhaust System - 2.5" with X-over for 64-72 GTO/LM, 70-81 FB/Trans Am

    $649.00

    Use with R/A or H/O factory headers - fits all GTO (except '74), all Firebird after '69, all Grand Prix after '69, all Big Car after '70. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF

    All complete systems includeRA flanges & your choice of mufflers (Goerlich, or SpinTech..see muffler section for details), 4 clamps & hangers & install instructions. (a word about flanges: we make the strongest and best fitting flanges in the market. Cost of poor quality is poor fit...case-in-point: the oversized flanges available from our competitors and also in aluminum. If they don't break the oversized corners may hit the frame in various applications )

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers). Mandrel bent headpipes and x-over tubes.

    Only superior RARE x-over components are used in our systems! Our X-crossover creates more torque on same car test than all the other brands which are merely 2 elbows welded together. Our X is designed by Nascar and OEM GM supplier .

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

  2. AWP-1 High Flow Aluminum Water Pump 69-81 PONTIAC

    AWP-1 High Flow Aluminum Water Pump 69-81 PONTIAC

    $129.00

    The best pump you can run on a Pontiac. Eliminates cooling problems caused by low pump output, especially at low RPMs. Learn More
  3. A03-F65B  Big  Pontiac Front Stabilizer Bar--1 1/8" solid  1965-1970 Cat, Bonne GP

    A03-F65B Big Pontiac Front Stabilizer Bar--1 1/8" solid 1965-1970 Cat, Bonne GP

    $189.00

    1965-1970 Big Pontiac Front Stabilizer bar and mounting kit Learn More
  4. NEW ITEM!!!   SHP-59/60 DOWNPIPE KIT FOR 1959 & 1960 PONTIACs

    NEW ITEM!!! SHP-59/60 DOWNPIPE KIT FOR 1959 & 1960 PONTIACs

    $195.00

    DOWNPIPE KIT FOR RUNNING LONG BRANCH H/O EXHAUST Learn More
  5. UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    $399.00

    This kit gives you everything you need ahead of the mufflers.

    Kit includes:
    Short mandrel bent headpipes
    Flanges
    X-over Kit
    Ball & Cone adapters
    Fit/install instructions

    Available in 2.5" or 3.0". The Ball & Cone adapters are a great feature which allow easy installation and removal making access for maintenance a cinch. It also allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

  6. UEG-XX Ultimate "Center Section" Exhaust Kit - for all GTO and 2nd Gen. Firebird

    UEG-XX Ultimate "Center Section" Exhaust Kit - for all GTO and 2nd Gen. Firebird

    $399.00

    This kit gives you everything you need ahead of the mufflers.

    Kit includes:
    Short mandrel bent headpipes
    Ram Air 2.5" Flanges
    2.5" X-over
    Ball & Cone adapters
    Fit/install instructions

    Available in 2.5". The Ball & Cone adapters are a great feature which allow easy installation and removal for any future maintenance. It allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

  7. UESYS-6 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over--all Pontiac 61-81 with Dual Mufflers

    UESYS-6 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over--all Pontiac 61-81 with Dual Mufflers

    $529.00

    All complete systems include your choice of mufflers ...OEM, Goerlich, or SpinTech. Check our Muffler section for muffler detail.

    This system comes with full length 2.25" or 2.5" headpipes and tail pipes (all aluminized 14 ga.) Also included are 6 clamps and the required hangers.

    Use with R/A or H/O factory headers or standard "log type" manifolds(You must specify manifold type in order comments) - all GTO (except '74), all Firebird after '69, all Grand Prix after '69, all Big Car after '70.

    All components are made in the USA. Learn More

  8. UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    $649.00

    Use with Long Branch factory headers - fits all B-body '64-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF!

    All complete systems include LB flanges, hangers , your choice of mufflers (Turbo, Goerlich, or SpinTech), 6 clamps and install instructions. FB use short case mufflers only.

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

    Only superior RARE x-over components are used in our systems!

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

  9. UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    $449.00

    All complete systems include your choice of mufflers...Delta Design, Goerlich, or SpinTech. See Muffler section for detail.

    This systems includes aluminized or stainless steel, 14ga, 2.25" or 2.5" full length headpipes and tailpipes. Also included are 6 clamps and required hangers.

    Use with Long Branch or Super Long Branch factory headers - all B-body '60-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only.

    All components are made in the USA. Learn More

  10. UESYS-3 Ultimate Exhaust System - 3.0" with X-over - Long Branch or Super Long Branch

    UESYS-3 Ultimate Exhaust System - 3.0" with X-over - Long Branch or Super Long Branch

    $649.00

    SAVE $25 OFF SYSTEM PRICE WITH FACTORY HEADER PURCHASE.

    All complete systems include your choice of mufflers (Turbo, Goerlich, or SpinTech), all flanges, hangers & 6 clamps and install instructions.

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

    Use with Long Branch or Super Long Branch factory headers - all B-body '60-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only.

    Only superior RARE x-over components are used in our systems!

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

Items 1 to 10 of 195 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction