Pontiac

Items 1 to 10 of 23 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction
  1. Head Pipes without Flanges - 2.5"

    Head Pipes without Flanges - 2.5"

    $189.00

    All pipes are 2.5" o.d. for Ram Air style or Long Branch style factory headers with OEM bends.

    Sold in pairs.

    Stainless and original size 2.25" available. Call to special order. Learn More

  2. Head Pipes with Flanges - 2.5"

    Head Pipes with Flanges - 2.5"

    $219.00

    All pipes are 2.5" o.d. for Ram Air style or Long Branch style factory headers with OEM bends.

    Sold in pairs.

    Stainless and original size 2.25" available. Call to special order. Learn More

  3. RM-2-OS in gray ceramic

    RM-2-OS Ram Air Style Factory Headers - Oversized 68-72 GTO & 2nd Gen Firebird


    Pair LH and RH Ram Air D-port manifolds (shown with gray ceramic coating)

    GET TUBE HEADER PERFORMANCE & EFFICIENCY WITHOUT ALL OF THE TUBE HEADER HASSLE AND GROUND CLEARANCE PROBS: BOLT IN FIT FOR: 68-72 Tempest/GTO/LM 70-81 Firebird/ Trans Am (exc 301)

    Ports are CNC'd and interior of castings are detailed...ready to run.

    Our castings are FAR SUPERIOR to competitors castings found at Ames / performance years/ Parts Place/ Classic ind. and Year One. Theirs all have terrible port detail and weigh 30% more! Our Lifetime warranty speaks to our quality.

    Collector opening is 2.45" for cars with "large pipe" exhaust systems and/or intake/head mods. Use our SSP-6 or SHP-6 mandrel downpipes or one of our Ultimate Exhaust Systems. Requires 2 FL-1-OS flanges, optional items H-1 bolt kit, G-1P gasket set

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock

    Learn More

  4. RM-2 in gray ceramic

    RM-2 D-Port Ram Air Style Factory Headers 68-72 GTO and 2nd Gen Firebird/TA


    Pair LH and RH Ram Air D-port manifolds (shown with gray ceramic coating)

    GET TUBE HEADER PERFORMANCE & EFFICIENCY WITHOUT ALL OF THE TUBE HEADER HASSLE AND GROUND CLEARANCE PROBS: BOLT IN FIT FOR : 68-72 GTO/LM 70-81 Firebird TA (exc 301)

    Ports are CNC'd and interior of castings are detailed...ready to run.

    Our castings are FAR SUPERIOR to competitors castings found at Ames / performance years/ Parts Place/ Classic ind. and Year One. Theirs all have terrible port detail and weigh 30% more! Our Lifetime warranty speaks to our quality.

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock Learn More

  5. PLC-33-B and PLC-33-C Billet 3-groove Crank Pulley for 1971-81 Pontiacs

    PLC-33-B and PLC-33-C Billet 3-groove Crank Pulley for 1971-81 Pontiacs

    $149.00

    Billet 3-groove crank pulley for 71-81 Pontiac.. Learn More
  6. UESYS-1 Ultimate Exhaust System - 2.5" with X-over for 64-72 GTO/LM, 70-81 FB/Trans Am

    UESYS-1 Ultimate Exhaust System - 2.5" with X-over for 64-72 GTO/LM, 70-81 FB/Trans Am

    $649.00

    Use with R/A or H/O factory headers - fits all GTO (except '74), all Firebird after '69, all Grand Prix after '69, all Big Car after '70. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF

    All complete systems includeRA flanges & your choice of mufflers (Goerlich, or SpinTech..see muffler section for details), 4 clamps & hangers & install instructions. (a word about flanges: we make the strongest and best fitting flanges in the market. Cost of poor quality is poor fit...case-in-point: the oversized flanges available from our competitors and also in aluminum. If they don't break the oversized corners may hit the frame in various applications )

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers). Mandrel bent headpipes and x-over tubes.

    Only superior RARE x-over components are used in our systems! Our X-crossover creates more torque on same car test than all the other brands which are merely 2 elbows welded together. Our X is designed by Nascar and OEM GM supplier .

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

  7. UESYS-6 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over--all Pontiac 61-81 with Dual Mufflers

    UESYS-6 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over--all Pontiac 61-81 with Dual Mufflers

    $529.00

    All complete systems include your choice of mufflers ...OEM, Goerlich, or SpinTech. Check our Muffler section for muffler detail.

    This system comes with full length 2.25" or 2.5" headpipes and tail pipes (all aluminized 14 ga.) Also included are 6 clamps and the required hangers.

    Use with R/A or H/O factory headers or standard "log type" manifolds(You must specify manifold type in order comments) - all GTO (except '74), all Firebird after '69, all Grand Prix after '69, all Big Car after '70.

    All components are made in the USA. Learn More

  8. TC-11 Stock timing cover for 69-81 Pontiac

    TC-11 Stock timing cover for 69-81 Pontiac

    $179.00

    Our reproduction 11 bolt timing cover is fully machined and has exact original configuration. Addtionally, it has large timing scale...12 degrees BTDC to 4 degrees ATDC. Excellent finish.

    Uses hardware kit TI-2 with correct length bolts and studs for original appearance.

    Finish options: natural aluminum (as cast), Powdercoated in Robins Egg Blue ('62-'65 engine color) or Metallic Silver Blue ('66-'70 engine color) or polished siver ceramic. Powder coating or ceramic is applied internally to provide protection against metal degrade over extended time. Learn More

  9. PSPS-75-81B-A, PSPS-75-81C-A Billet Pulley Set - All 1975-81 V8s with P/S & A/C

    PSPS-75-81B-A, PSPS-75-81C-A Billet Pulley Set - All 1975-81 V8s with P/S & A/C

    $369.00

    Pulley set for 1975-1981 Pontiac V8, with P/S & a/c; includes 3 gr crank, water pump, power steering pump (press-on type), and alternator pulleys. Much stronger & "true-er" than stamped steel pulleys.

    Please select your desired finish below. Learn More

  10. AWP-1P High Flow Aluminum Water Pump 69-81 PONTIAC

    AWP-1P High Flow Aluminum Water Pump 69-81 PONTIAC

    $189.00

    POLISHED TO BRIGHT REFLECTIVE FINISH WITH CLEAR-CERAMIC COATING...Aluminum Flowkooler water pump fits all engines with 69 or later timing cover. 11-bolt type stock offset on pump flange for correct pulley alignment. Hi flow impeller makes this pump the most efficient available! 4.5" length Comes with 2 gaskets required for install (one behind pump & one behind your plate). Click on picture for impeller view. Learn More

Items 1 to 10 of 23 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction