Pontiac

Items 1 to 10 of 35 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction
  1. Head Pipes without Flanges - 2.5"

    Head Pipes without Flanges - 2.5"

    $189.00

    All pipes are 2.5" o.d. for Ram Air style or Long Branch style factory headers with OEM bends.

    Sold in pairs.

    Stainless and original size 2.25" available. Call to special order. Learn More

  2. Head Pipes with Flanges - 2.5"

    Head Pipes with Flanges - 2.5"

    $219.00

    All pipes are 2.5" o.d. for Ram Air style or Long Branch style factory headers with OEM bends.

    Sold in pairs.

    Stainless and original size 2.25" available. Call to special order. Learn More

  3. RM-2-OS in gray ceramic

    RM-2-OS Ram Air Style Factory Headers - Oversized 68-72 GTO & 2nd Gen Firebird


    Pair LH and RH Ram Air D-port manifolds (shown with gray ceramic coating)

    GET TUBE HEADER PERFORMANCE & EFFICIENCY WITHOUT ALL OF THE TUBE HEADER HASSLE AND GROUND CLEARANCE PROBS: BOLT IN FIT FOR: 68-72 Tempest/GTO/LM 70-81 Firebird/ Trans Am (exc 301)

    Ports are CNC'd and interior of castings are detailed...ready to run.

    Our castings are FAR SUPERIOR to competitors castings found at Ames / performance years/ Parts Place/ Classic ind. and Year One. Theirs all have terrible port detail and weigh 30% more! Our Lifetime warranty speaks to our quality.

    Collector opening is 2.45" for cars with "large pipe" exhaust systems and/or intake/head mods. Use our SSP-6 or SHP-6 mandrel downpipes or one of our Ultimate Exhaust Systems. Requires 2 FL-1-OS flanges, optional items H-1 bolt kit, G-1P gasket set

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock

    Learn More

  4. RM-2 in gray ceramic

    RM-2 D-Port Ram Air Style Factory Headers 68-72 GTO and 2nd Gen Firebird/TA


    Pair LH and RH Ram Air D-port manifolds (shown with gray ceramic coating)

    GET TUBE HEADER PERFORMANCE & EFFICIENCY WITHOUT ALL OF THE TUBE HEADER HASSLE AND GROUND CLEARANCE PROBS: BOLT IN FIT FOR : 68-72 GTO/LM 70-81 Firebird TA (exc 301)

    Ports are CNC'd and interior of castings are detailed...ready to run.

    Our castings are FAR SUPERIOR to competitors castings found at Ames / performance years/ Parts Place/ Classic ind. and Year One. Theirs all have terrible port detail and weigh 30% more! Our Lifetime warranty speaks to our quality.

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock Learn More

  5. FL-3 2-Bolt Flange for Long Branch

    FL-3 2-Bolt Flange for Long Branch

    $24.00

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits up to 2.5" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Click on photo for a comparison photo of our flange (left), original GM flange (center) and flanges from Performance Years (Right). Learn More

  6. FL-3-OS 2-Bolt Flange for Super Long Branch

    FL-3-OS 2-Bolt Flange for Super Long Branch

    $32.50

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits 3.0" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Learn More

  7. OF-1 Large Oil Filter Adapter - Big Car

    OF-1 Large Oil Filter Adapter - Big Car

    $89.00

    Re-clocks oil filter to allow clearance with header. All hardware, gaskets and instructions included. Learn More
  8. OF-2 Small Oil Filter Adapter - Firebird

    OF-2 Small Oil Filter Adapter - Firebird

    $79.00

    Re-clocks oil filter to allow clearance wit header. Used for Firebird, Grand Prix and X body Ventura Long Branch applications. Our adapter has improved engineering which eliminates the 3rd gasket and metal plate that other repros must use. Includes mounting hardware, gaskets and install instructions. Learn More
  9. LB-1 in gray ceramic

    LB-1 Long Branch D-Port Factory Headers...67-69 Firebird, 60-70 Big Car(Cat/Bonne), 71-77 Ventura & 69-72 Grand Prix

    Pair D-port Long Branch Factory Headers (shown with optional gray ceramic coating)

    Get tube header performance gains without the tube header hassles, noise and ground clearance problems in Pontiacs. The best flowing and most original appearing Long Branch factory headers

    Fits 67-69 GM F-body Firebird, 71-77 X-body Ventura, 60-70 B-body Cat Bonne, 69-72 GP. Castings from our competition aren't even close to the LB-1 quality and flow and our original detail. Compare castings that Ames Perf and all the catalog guys sell to ours in photos above. Our warranty says exactly what our product quality is...Lifetime, period. More detail below...

    2 correct part numbers versions available:
    1960-67 - LH 9779495, RH 9779493
    1968-69 - LH 9779495, RH 9791607

    Each requires 2-bolt flange (FL-3 sold separately); also requires oil filter adapter OF-1 (big car) or OF-2(Firebird, GP and Ventura). Other recommended items H-5 bolt kit and G1-P gasket set.

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 30%! Silver is chrome-like. Gray looks stock. Learn More

  10. UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    $399.00

    This kit gives you everything you need ahead of the mufflers.

    Kit includes:
    Short mandrel bent headpipes
    Flanges
    X-over Kit
    Ball & Cone adapters
    Fit/install instructions

    Available in 2.5" or 3.0". The Ball & Cone adapters are a great feature which allow easy installation and removal making access for maintenance a cinch. It also allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

Items 1 to 10 of 35 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction