Pontiac

Items 1 to 10 of 36 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction
  1. TC-11 Stock timing cover for 69-81 Pontiac

    TC-11 Stock timing cover for 69-81 Pontiac

    $179.00

    Our reproduction 11 bolt timing cover is fully machined and has exact original configuration. Addtionally, it has large timing scale...12 degrees BTDC to 4 degrees ATDC. Excellent finish.

    Uses hardware kit TI-2 with correct length bolts and studs for original appearance.

    Finish options: natural aluminum (as cast), Powdercoated in Robins Egg Blue ('62-'65 engine color) or Metallic Silver Blue ('66-'70 engine color) or polished siver ceramic. Powder coating or ceramic is applied internally to provide protection against metal degrade over extended time. Learn More

  2. OF-2 Small Oil Filter Adapter - Firebird

    OF-2 Small Oil Filter Adapter - Firebird

    $79.00

    Re-clocks oil filter to allow clearance wit header. Used for Firebird, Grand Prix and X body Ventura Long Branch applications. Our adapter has improved engineering which eliminates the 3rd gasket and metal plate that other repros must use. Includes mounting hardware, gaskets and install instructions. Learn More
  3. UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    $449.00

    All complete systems include your choice of mufflers...Delta Design, Goerlich, or SpinTech. See Muffler section for detail.

    This systems includes aluminized or stainless steel, 14ga, 2.25" or 2.5" full length headpipes and tailpipes. Also included are 6 clamps and required hangers.

    Use with Long Branch or Super Long Branch factory headers - all B-body '60-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only.

    All components are made in the USA. Learn More

  4. FL-3-OS 2-Bolt Flange for Super Long Branch

    FL-3-OS 2-Bolt Flange for Super Long Branch

    $32.50

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits 3.0" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Learn More

  5. OF-1 Large Oil Filter Adapter - Big Car

    OF-1 Large Oil Filter Adapter - Big Car

    $89.00

    Re-clocks oil filter to allow clearance with header. All hardware, gaskets and instructions included. Learn More
  6. LB-1 in gray ceramic

    LB-1 Long Branch D-Port Factory Headers...67-69 Firebird, 60-70 Big Car(Cat/Bonne), 71-77 Ventura & 69-72 Grand Prix

    Pair D-port Long Branch Factory Headers (shown with optional gray ceramic coating)

    Get tube header performance gains without the tube header hassles, noise and ground clearance problems in Pontiacs. The best flowing and most original appearing Long Branch factory headers

    Fits 67-69 GM F-body Firebird, 71-77 X-body Ventura, 60-70 B-body Cat Bonne, 69-72 GP. Castings from our competition aren't even close to the LB-1 quality and flow and our original detail. Compare castings that Ames Perf and all the catalog guys sell to ours in photos above. Our warranty says exactly what our product quality is...Lifetime, period. More detail below...

    2 correct part numbers versions available:
    1960-67 - LH 9779495, RH 9779493
    1968-69 - LH 9779495, RH 9791607

    Each requires 2-bolt flange (FL-3 sold separately); also requires oil filter adapter OF-1 (big car) or OF-2(Firebird, GP and Ventura). Other recommended items H-5 bolt kit and G1-P gasket set.

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 30%! Silver is chrome-like. Gray looks stock. Learn More

  7. UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    $399.00

    This kit gives you everything you need ahead of the mufflers.

    Kit includes:
    Short mandrel bent headpipes
    Flanges
    X-over Kit
    Ball & Cone adapters
    Fit/install instructions

    Available in 2.5" or 3.0". The Ball & Cone adapters are a great feature which allow easy installation and removal making access for maintenance a cinch. It also allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

  8. UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    $649.00

    Use with Long Branch factory headers - fits all B-body '64-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF!

    All complete systems include LB flanges, hangers , your choice of mufflers (Turbo, Goerlich, or SpinTech), 6 clamps and install instructions. FB use short case mufflers only.

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

    Only superior RARE x-over components are used in our systems!

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

  9. UESYS-3 Ultimate Exhaust System - 3.0" with X-over - Long Branch or Super Long Branch

    UESYS-3 Ultimate Exhaust System - 3.0" with X-over - Long Branch or Super Long Branch

    $649.00

    SAVE $25 OFF SYSTEM PRICE WITH FACTORY HEADER PURCHASE.

    All complete systems include your choice of mufflers (Turbo, Goerlich, or SpinTech), all flanges, hangers & 6 clamps and install instructions.

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

    Use with Long Branch or Super Long Branch factory headers - all B-body '60-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only.

    Only superior RARE x-over components are used in our systems!

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

  10. TC-1PRO  "SLICK FRONT" PRO-COVER FOR PONTIACs

    TC-1PRO "SLICK FRONT" PRO-COVER FOR PONTIACs

    $269.00

    "Slick"(Non-finned) front Pro-cover for all Pontiac V-8. Use with any small block chevy electric or short-neck mechanical water pump. Cover comes complete with fully adjustable timing indicator. It adjusts for actual tdc and any balancer diameter. Includes stainless socket head capscrews for installation.

    OPTIONAL CERAMIC OR POWDERCOATING:
    Pro-cover available in Pontiac engine color powdercoat or polished ceramic silver finish options. Powder coating or ceramic is applied internally as well to prevent metal degrade over extended time. Learn More

Items 1 to 10 of 36 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction