Pontiac

Items 1 to 10 of 31 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction
  1. 1964 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower

    1964 Pontiac B-body Catalina/Bonne Ball Joint Kit 2upper & 2lower

    $299.00

    All four ball joints with attaching hardware for all Pontiac B-body (Cat/Bonne/Safari/Executive/Ventura) for maodel years 1964 only. All four ball joints have forged housings (all competitors have stamped steel uppers) and come with grade 8 bolts and grease fittings. Shipping in lower 48 is 9.95. Learn More
  2. FL-3 2-Bolt Flange for Long Branch

    FL-3 2-Bolt Flange for Long Branch

    $24.00

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits up to 2.5" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Click on photo for a comparison photo of our flange (left), original GM flange (center) and flanges from Performance Years (Right). Learn More

  3. FL-3-OS 2-Bolt Flange for Super Long Branch

    FL-3-OS 2-Bolt Flange for Super Long Branch

    $32.50

    2 flanges required per car. with our D-port or Round port Long Branch factory headers. Fits 3.0" pipes.

    A couple of notes on our flanges...they are not oversized units that our competitors sell. Oversized flanges will cause clearance probs with starters, etc. We make the strongest and best fitting flanges in the market. Period. Some of our competitors provide easy-to-break aluminum flanges in the name of "cost reduction"...ill advised! Learn More

  4. OF-1 Large Oil Filter Adapter - Big Car

    OF-1 Large Oil Filter Adapter - Big Car

    $89.00

    Re-clocks oil filter to allow clearance with header. All hardware, gaskets and instructions included. Learn More
  5. LB-1 in gray ceramic

    LB-1 Long Branch D-Port Factory Headers...67-69 Firebird, 60-70 Big Car(Cat/Bonne), 71-77 Ventura & 69-72 Grand Prix

    Pair D-port Long Branch Factory Headers (shown with optional gray ceramic coating)

    Get tube header performance gains without the tube header hassles, noise and ground clearance problems in Pontiacs. The best flowing and most original appearing Long Branch factory headers

    Fits 67-69 GM F-body Firebird, 71-77 X-body Ventura, 60-70 B-body Cat Bonne, 69-72 GP. Castings from our competition aren't even close to the LB-1 quality and flow and our original detail. Compare castings that Ames Perf and all the catalog guys sell to ours in photos above. Our warranty says exactly what our product quality is...Lifetime, period. More detail below...

    2 correct part numbers versions available:
    1960-67 - LH 9779495, RH 9779493
    1968-69 - LH 9779495, RH 9791607

    Each requires 2-bolt flange (FL-3 sold separately); also requires oil filter adapter OF-1 (big car) or OF-2(Firebird, GP and Ventura). Other recommended items H-5 bolt kit and G1-P gasket set.

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 30%! Silver is chrome-like. Gray looks stock. Learn More

  6. UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    UEXX Ultimate "Center Section" Exhaust Kit - for all LB and SLB Applications

    $399.00

    This kit gives you everything you need ahead of the mufflers.

    Kit includes:
    Short mandrel bent headpipes
    Flanges
    X-over Kit
    Ball & Cone adapters
    Fit/install instructions

    Available in 2.5" or 3.0". The Ball & Cone adapters are a great feature which allow easy installation and removal making access for maintenance a cinch. It also allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

  7. MS-2 High Torque Mini-starter for Pontiac Engines - 1961-1964

    MS-2 High Torque Mini-starter for Pontiac Engines - 1961-1964

    $219.00

    Fits early engines with starter bolting to bell housing.

    Starter can be "clocked" 360 degrees providing the most clearance options available in a starter! 1-year Warranty Learn More

  8. UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch or Super Long Branch

    $649.00

    Use with Long Branch factory headers - fits all B-body '64-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF!

    All complete systems include LB flanges, hangers , your choice of mufflers (Turbo, Goerlich, or SpinTech), 6 clamps and install instructions. FB use short case mufflers only.

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

    Only superior RARE x-over components are used in our systems!

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

  9. UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    UESYS-7 Ultimate Exhaust Dual System - 2.25" or 2.5" w/o X-over - Long Branch or Super Long Branch

    $449.00

    All complete systems include your choice of mufflers...Delta Design, Goerlich, or SpinTech. See Muffler section for detail.

    This systems includes aluminized or stainless steel, 14ga, 2.25" or 2.5" full length headpipes and tailpipes. Also included are 6 clamps and required hangers.

    Use with Long Branch or Super Long Branch factory headers - all B-body '60-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only.

    All components are made in the USA. Learn More

  10. UESYS-3 Ultimate Exhaust System - 3.0" with X-over - Long Branch or Super Long Branch

    UESYS-3 Ultimate Exhaust System - 3.0" with X-over - Long Branch or Super Long Branch

    $649.00

    SAVE $25 OFF SYSTEM PRICE WITH FACTORY HEADER PURCHASE.

    All complete systems include your choice of mufflers (Turbo, Goerlich, or SpinTech), all flanges, hangers & 6 clamps and install instructions.

    Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).

    Use with Long Branch or Super Long Branch factory headers - all B-body '60-'70, all Firebird '67-'69, all X-body, and Grand Prix '69 only.

    Only superior RARE x-over components are used in our systems!

    Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.

    All components are made in the USA. Learn More

Items 1 to 10 of 31 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction