Pontiac

Items 41 to 50 of 197 total

per page
Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7

Grid  List 

Set Ascending Direction
  1. A01-002 POLYURETHANE REAR AXLE BUSHINGS FOR GM CARS

    A01-002 POLYURETHANE REAR AXLE BUSHINGS FOR GM CARS

    $29.90

    PAIR OF ENERGY SUSPENSION BRAND POLY REAR AXLE BUSHINGS FOR GM CARS. THESE BUSHING INSTALL IN THE REAR END UPPER LOCATIONS FOR ALL 10 AND 12 BOLT HOUSINGS FOR 65-72 GTO/CHEVELLE/442, 69-72 GRAND PRIX AND 69-70 B-BODY (CAT/BONNE) USE ONE PAIR.

    65-68 B-BODY USE 2 PAIR BUSHINGS.

    ALL BUSHINGS COME WITH THRUST WASHERS TO PREVENT "CONTROL ARM WALK." Learn More

  2. AWP-2  8 BOLT  HIGH FLOW WATER PUMP

    AWP-2 8 BOLT HIGH FLOW WATER PUMP

    $129.00

    FOR 1963-1968 8 BOLT WATER PUMP WITH INGENIOUS IMPELLER WHICH IS THE MOST EFFICIENT AVAILABLE. THIS DESIGN ELIMINATES "CAVITATION" WHICH ENSURES EFFECTIVE COOLANT MOVEMENT. COMES WITH WATER PUMP GASKETS, CAST IRON HOUSING. Learn More
  3. TC-1F-PRO "FINNED FRONT" PRO-COVER FOR PONTIACs

    TC-1F-PRO "FINNED FRONT" PRO-COVER FOR PONTIACs

    $269.00

    Aluminum Pontiac timing cover with adjustable timing indicator.  Accepts all aftermarket SBC electric or mechanical water pumps.  Can use with any balancer (stk or aftermarket) as indicator adjusts for balancer dia and actual tdc.  Includes timing indicator and stainless socket head hardware. 

    OPTIONAL CERAMIC OR POWDERCOATING:
    Pro-cover available in Pontiac engine color powdercoat or polished ceramic silver finish options. Powder coating or ceramic is applied internally as well to prevent metal degrade over extended time. Learn More

  4. TI-1 Billet timing indicator

    TI-1 Billet timing indicator

    $19.50

    Adjustable timing indicator. Billet frame and stainless pointer...easy to add to stock timing covers that don't have timing mark or cover modified to run large balancer. Comes with 2 ny-loc set screws for attaching to front cover. Learn More
  5. TI-2 Stock Timing cover hardware kit

    TI-2 Stock Timing cover hardware kit

    $9.75

    Install hardware for stock 11-bolt Pontiac timing covers. Has correct length gde 8 fastners and studs with stainless nuts/washers. This kit works with our TC-11 reproduction timing covers. Learn More
  6. TFP-1 FUEL PUMP ECCENTRIC

    TFP-1 FUEL PUMP ECCENTRIC

    $39.00

    NEW!!! FUEL PUMP ECCENTRIC AND BUSHING FOR ALL PONTIAC V-8. These are made from case-hardened steel for a lifetime of trouble free service. Direct replacement for all Pontiac V-8s 1955-1981 and all 4cyl 1961-1963. Learn More
  7. TS-1 Timing Cover Seal

    TS-1 Timing Cover Seal

    $19.45

    Timing cover seal for all Pontiac timing covers (including our Pro-covers) Learn More
  8. PHB-1 Pontiac 2-pc Balancer Kit

    PHB-1 Pontiac 2-pc Balancer Kit

    $179.00

    Pontiac Harmonic Balancer kit for all 1959-1966 V8s. This is same 2piece design as original but in superior grade material. SFI tested to 12,000 rpm. Comes with correct timing marks on hub, dampening ring, reinforcing plate, grade 8 assemby hardware and new crank key. Excellent quality.

    Finish options--pick one below--N/A-bare, ready for painting; Powdercoated in Robins-egg blue (early 60s engine color thru 1965); Powdercoated in silver-blue metallic (1966 engine color); Polished Ceramic silver-for custom look. Learn More

  9. SSWP-1  STAINLESS 11-BOLT WATER PUMP PLATE

    SSWP-1 STAINLESS 11-BOLT WATER PUMP PLATE

    $35.00

    Stainless water pump back plate for all 11 bolt timing covers. This plate will not deteriorate like stock and standard steel plates will. Learn More
  10. TCS-1 TIMING COVER SLEEVE&SEALS

    TCS-1 TIMING COVER SLEEVE&SEALS

    $19.00

    PAIR, SLEEVES AND SEALS USED IN ALL PONTIAC 11 BOLT TIMING COVERS. THESE SEAL THE WATER PUMP PLATE TO THE TIMING COVER FOR EFFICIENT COOLANT FLOW INTO THE CYLINDER BLOCK. 1 PAIR METAL SLEEVES WITH NEOPRENE SEALS. Learn More

Items 41 to 50 of 197 total

per page
Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7

Grid  List 

Set Ascending Direction