Pontiac

Items 21 to 30 of 197 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. NEW! O-SYS-1  3" OVAL EXHAUST FOR GTO/LM & FB WITH RAM AIR FACTORY HEADERS

    NEW! O-SYS-1 3" OVAL EXHAUST FOR GTO/LM & FB WITH RAM AIR FACTORY HEADERS

    $699.00

    Use with R/A or H/O factory headers - fits all GTO (except '74), all Firebird after '69, all Grand Prix after '69, all Big Car after '70. ORDER WITH FACTORY HEADERS AND GET $25.00 OFF

    THIS IS A NEW OPTION FOR FACTORY HEADER APPLICATIONS!

    System includes RA flanges on 3" downpipes, bolt kit, gasket set & your choice of mufflers (Goerlich, or SpinTech..see muffler section for details), 4 stainless clamps & install instructions. (a word about flanges: we make the strongest and best fitting flanges in the market. Cost of poor quality can be felt from the p.o.s. flanges available from our competitors...aluminum flanges? really???)

    Oval 3" tube and oval Xcrossover provides an out of sight, Zero hp loss exhaust system. 2.5" or 3" Mandrel bent tailpipes included. NEW--side exit option (click on photo for side exit photo)

    Only superior RARE x-over components are used in our systems! Our X-crossover create more torque on same car test than all the other brands which are merely 2 elbows welded together. Our X is designed by Nascar and OEM GM supplier .

    All components are made in the USA.

    Please list your year&model in order comments Learn More

  2. UESYS-2C Ultimate System for FB Convertible

    UESYS-2C Ultimate System for FB Convertible

    $799.00

    Ultimate exhaust for 67-69 Firebird Convertible with our X-crossover which fits above the X-brace. No need to lower the brace and give up valuable strength & ground clearance. Includes downpipes for Long Branch factory headers and ball&cone connections that install in the front of each muffler so the system can easily be removed and reinstalled. Mandrel bent tails go all the way to the rear. If you want tails that turn-down behind rear tire state your preference in order comments. All American made Lifetime warranty. Comes with easy to use rod hangers, clamps and instructions. Welding is recommended.

    Mufflers that fit in this system are listed below. Best fit are the 3334F Spin Tech as it is only 3" tall which maximizes ground clearance. Other muffler options are 4" tall. Learn More

  3. 3" AND 3.5" OVAL HEADER BACK SYSTEMS FOR FIREBIRD & VENTURA II UPO-351

    3" AND 3.5" OVAL HEADER BACK SYSTEMS FOR FIREBIRD & VENTURA II UPO-351

    $749.00

    OUR NEW OVALIZED BIG-TUBE EXHAUST SYSTEMS DELIVER THE GREATEST BENEFITS AVAILABLE IN THE MARKET! MAX TORQUE, EASE OF INSTALLATION AND GROUND CLEARANCE.ALL ALUMINIZED TUBING.

    OVAL R.A.R.E. X-CROSSOVER INCLUDED IN SYSTEM WITH ROUND -TO-OVAL TRANSISTIONS TO CONNECT TO HEADER COLLECTORS AND MUFFLERS. ALL JOINTS ARE SLIP-FIT. THE TRANSISITIONS ALLOW YOU TO INSTALL THE SYSTEM IN HIGHER PLANE UNDER THE CAR SO YOU GAIN GROUND CLEARANCE 2 WAYS...FROM SHORT VERTICAL PROFILE OF OVAL TUBE AND BY TIGHT FIT TO UNDERCARRIAGE. (click on photo to see comparitive difference of 3.5 oval and round tubes)

    SYSTEM INCLUDES HEADER FLANGES&GASKETS, HANGERS, CLAMPS, YOUR CHOICE OF MUFFLERS AND TAILPIPE STYLES

    IF YOU RUN TAILPIPE 1 SIZE SMALLER THAN REST OF SYSTEM ADAPTERS ARE INCLUDED.

    TAILPIPE SIZES:

    A BODY-GTO/LM- 64-77 2.5, 3.0, 3.5

    B BODY-CAT/BONNE/GRANDVILLE 71-90 2.5, 3.0

    F BODY-FB 67-81 2.5, 3.0, 3.5

    G BODY-GRAND PRIX 69-88 2.5, 3.0, 3.5 (69-77)

    X BODY-VENTURA 71-76 2.5, 3.0, 3.5

    ** NOTE** PLEASE STATE YOUR VEHICLE MODEL&YEAR IN ORDER COMMMENTS Learn More

  4. RM-4 Round Port Ram Air/HO/SD Style Factory Headers

    RM-4 Round Port Ram Air/HO/SD Style Factory Headers

    Pair, (LH and RH) Ram Air Round Port Manifolds (shown at right with gray ceramic coating)

    Fits 68-79 GM A-body; 70 1/2-81 F-Body; 69-77 G-Body, 69-81 B-Body with these heads: RA II, RA IV, 455 HO, 455 SD, Edelbrock heads.

    Manifolds are 455SD design (the largest Round Port design).

    Original casting numbers on Manifolds: LH 490803, RH 490802 Exact Reproductions from GM blueprints.

    RAIV pns now available by request!

    LH requires 2 bolt flange, RH requires 3 bolt flange; Collector size is 2.2"

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Castings are port matched to Pontiac Blueprint then thermal barrier ceramic coating is applied on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock.

    Learn More

  5. RM-4-OS Round Port Ram Air/HO/SD Style Factory Headers - Oversized

    RM-4-OS Round Port Ram Air/HO/SD Style Factory Headers - Oversized

    $439.00

    Pair, (LH and RH) Ram Air Round Port Manifolds with Larger Collector (shown at right with gray ceramic coating)

    Fits 68-79 GM A-body; 70 1/2-81 F-Body; 69-77 G-Body, 69-81 B-Body with these heads: RA II, RA IV, 455 HO, 455 SD, Edelbrock heads. Collector size is 2.45" for cars with "large pipe" exhaust systems and/or intake/head mods. The larger collector gives 14-16% more flow capability than stock collector castings. Lifetime warrantee on material and workmanship!

    Manifolds are 455SD design (the largest Round Port design). Original casting numbers on Manifolds: LH 490803, RH 490802 Exact Reproductions from GM blueprints.

    RA IV casting numbers now available upon Request!

    LH requires 2 bolt flange, RH requires 3 bolt flange (sold sererately)

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Castings are port matched to Pontiac Blueprint then thermal barrier ceramic coating is applied on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock.

    Learn More

  6. RM-1 in Gray Ceramic

    RM-1 D-Port Ram Air Style Factory Headers 64-67 GTO plus other apps


    Pair LH and RH Ram Air D-port manifolds (shown with gray ceramic coating)

    Pair LH and RH Ram Air D-port manifolds (shown at right with gray ceramic coating)

    GET TUBE HEADER PERFORMANCE & EFFICIENCY WITHOUT ALL OF THE TUBE HEADER HASSLE AND GROUND CLEARANCE PROBS: BOLT IN FIT FOR : 1961-1963 Tempest/LeMans, 64-67 Tempest/GTO/LM 73-79 LeMans, 73-87 Grand Prix, 78-87 GM G-body (Lemans, Regal) 71-79 GM B-Body (Catalina/Bonne/Grandville/Parisienne)

    Ports are CNC'd and interior of castings are detailed...ready to run.

    Our castings are FAR SUPERIOR to competitors castings found at Ames / performance years/ Parts Place/ Classic ind. and Year One. Theirs all have terrible port detail and weigh 30% more! Our Lifetime warranty speaks to our quality. Learn More

  7. Rm-1-OS in Gray Ceramic.

    RM-1-OS D-Port Ram Air Style Factory Headers - Oversized 64-67 GTO plus other apps

    $419.00


    Pair LH and RH Ram Air D-port manifolds (shown with gray ceramic coating)

    GET TUBE HEADER PERFORMANCE & EFFICIENCY WITHOUT ALL OF THE TUBE HEADER HASSLE AND GROUND CLEARANCE PROBS: BOLT IN FIT FOR : 1961-1963 Tempest/LeMans, 64-67 Tempest/GTO/LM 73-79 LeMans, 73-87 Grand Prix, 78-87 GM G-body (Lemans, Regal) 71-79 GM B-Body (Catalina/Bonne/Grandville/Parisienne)

    Ports are CNC'd and interior of castings are detailed...ready to run.

    Our castings are FAR SUPERIOR to competitors castings found at Ames / performance years/ Parts Place/ Classic ind. and Year One. Theirs all have terrible port detail and weigh 30% more! Our Lifetime warranty speaks to our quality. Learn More

  8. RM-2 in gray ceramic

    RM-2 D-Port Ram Air Style Factory Headers 68-72 GTO and 2nd Gen Firebird/TA


    Pair LH and RH Ram Air D-port manifolds (shown with gray ceramic coating)

    GET TUBE HEADER PERFORMANCE & EFFICIENCY WITHOUT ALL OF THE TUBE HEADER HASSLE AND GROUND CLEARANCE PROBS: BOLT IN FIT FOR : 68-72 GTO/LM 70-81 Firebird TA (exc 301)

    Ports are CNC'd and interior of castings are detailed...ready to run.

    Our castings are FAR SUPERIOR to competitors castings found at Ames / performance years/ Parts Place/ Classic ind. and Year One. Theirs all have terrible port detail and weigh 30% more! Our Lifetime warranty speaks to our quality.

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock Learn More

  9. RM-2-OS in gray ceramic

    RM-2-OS Ram Air Style Factory Headers - Oversized 68-72 GTO & 2nd Gen Firebird


    Pair LH and RH Ram Air D-port manifolds (shown with gray ceramic coating)

    GET TUBE HEADER PERFORMANCE & EFFICIENCY WITHOUT ALL OF THE TUBE HEADER HASSLE AND GROUND CLEARANCE PROBS: BOLT IN FIT FOR: 68-72 Tempest/GTO/LM 70-81 Firebird/ Trans Am (exc 301)

    Ports are CNC'd and interior of castings are detailed...ready to run.

    Our castings are FAR SUPERIOR to competitors castings found at Ames / performance years/ Parts Place/ Classic ind. and Year One. Theirs all have terrible port detail and weigh 30% more! Our Lifetime warranty speaks to our quality.

    Collector opening is 2.45" for cars with "large pipe" exhaust systems and/or intake/head mods. Use our SSP-6 or SHP-6 mandrel downpipes or one of our Ultimate Exhaust Systems. Requires 2 FL-1-OS flanges, optional items H-1 bolt kit, G-1P gasket set

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 40%! Silver is chrome-like. Gray looks stock

    Learn More

  10. LB-1 in gray ceramic

    LB-1 Long Branch D-Port Factory Headers...67-69 Firebird, 60-70 Big Car(Cat/Bonne), 71-77 Ventura & 69-72 Grand Prix

    Pair D-port Long Branch Factory Headers (shown with optional gray ceramic coating)

    Get tube header performance gains without the tube header hassles, noise and ground clearance problems in Pontiacs. The best flowing and most original appearing Long Branch factory headers

    Fits 67-69 GM F-body Firebird, 71-77 X-body Ventura, 60-70 B-body Cat Bonne, 69-72 GP. Castings from our competition aren't even close to the LB-1 quality and flow and our original detail. Compare castings that Ames Perf and all the catalog guys sell to ours in photos above. Our warranty says exactly what our product quality is...Lifetime, period. More detail below...

    2 correct part numbers versions available:
    1960-67 - LH 9779495, RH 9779493
    1968-69 - LH 9779495, RH 9791607

    Each requires 2-bolt flange (FL-3 sold separately); also requires oil filter adapter OF-1 (big car) or OF-2(Firebird, GP and Ventura). Other recommended items H-5 bolt kit and G1-P gasket set.

    GET $25.00 OFF WHEN YOU ORDER OUR X-CROSSOVER EXHAUST SYSTEM WITH OUR FACTORY HEADERS!

    OPTIONAL CERAMIC COATING:
    Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Guarantee. Will not burn off, fade or peel. Reduces header temperature 30%! Silver is chrome-like. Gray looks stock. Learn More

Items 21 to 30 of 197 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction