Pipes & X-over Kits

Pipes & X-over Kits

9 Item(s)

per page

Grid  List 

Set Ascending Direction
  1. X-1  2.5" X-Crossover Kit

    X-1 2.5" X-Crossover Kit

    $169.00

    2.5" X-crossover junction with 2.5" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.

    Recommended for all applications to 450hp.

    Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More

  2. X-2 3" X-Crossover Kit-Round Tube

    X-2 3" X-Crossover Kit-Round Tube

    $219.00

    3.0" X-crossover junction with 3" mandrel bent entry and exit tubes. Universal for all dual exhausts. Requires trimming, clamp or weld.

    Recommended for 450+ hp applications

    Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers!. Learn More

  3. BCC-25 2.5" Ball & Cone Connectors - Aluminized

    BCC-25 2.5" Ball & Cone Connectors - Aluminized

    $39.00

    Pair, 2.5" ball&cone connectors, aluminized steel with flanges & hardware. Placed in front of mufflers, these make exhaust system removal and re-instal a snap. Make connections with up to 10 degree turn. Learn More
  4. BCC-30  3.0" Ball & Cone Connectors - Aluminized

    BCC-30  3.0" Ball & Cone Connectors - Aluminized

    $79.00

    Pair, 3.0" ball&cone connectors, aluminized steel with flanges & hardware. Placed in front of mufflers, these make exhaust system removal and re-instal a snap. Make connections with up to 10 degree turn. Learn More
  5. TPMM-1B Mopar B-Body Mandrel Tailpipe kit

    TPMM-1B Mopar B-Body Mandrel Tailpipe kit

    $219.00

    Mandrel bent tailpipes for B-body Mopars. 2.5" and 3.0" available. Aluminized with hangers and clamps (these tails are included in our systems when selected). Learn More
  6. TPMM-1A Mopar A-Body Mandrel Tailpipe kit

    TPMM-1A Mopar A-Body Mandrel Tailpipe kit

    $219.00

    Mandrel bent tailpipes for A-body Mopars. 2.5" and 3.0" available. Aluminized with hangers and clamps (these tails are included in our systems when selected). Learn More
  7. TPMM-1E Mopar E-Body Mandrel Tailpipe kit

    TPMM-1E Mopar E-Body Mandrel Tailpipe kit

    $249.00

    Mandrel bent tailpipes for E-body Mopars. 3.0" (doesn't include hangers--photo not correct) with rear turn-down. Aluminized with clamps (these tails are included in our systems when selected). Learn More
  8. X-35 X-Crossover kit 3.5"  Round Tube

    X-35 X-Crossover kit 3.5" Round Tube

    $240.00

    From our family of X-crossovers...3.5" UNIVERSAL X-KIT, ALL ALUMINIZED WITH MANDREL BENT 3.5" ENTRY & EXIT PIPES. TRIM TO FIT YOUR HEADER COLLECTOR C-TO-C.

    Recommended for 550hp+ applications.

    Our X crossovers will deliver bigger torque gains (better acceleration)than any other system or other brand X and we've proven it on the dyno! Our X-crossover features a research-driven design which splits the exhaust into two equal sub-pulses. This is where other brands fall short. On a mild-built big-block we made 10-15ft/lbs more torque than competitors' X. That difference grows with more radical build. More torque than running open headers! Learn More

  9. 3" & 3.5" OVAL X-CROSSOVER KIT  X-3O

    3" & 3.5" OVAL X-CROSSOVER KIT X-3O

    $369.00

    OUR NEW OVALIZED BIG-TUBE CROSSOVERS DELIVER THE GREATEST BENEFITS AVAILABLE IN THE MARKET! MAX TORQUE, EASE OF INSTALLATION AND GROUND CLEARANCE.

    OVAL R.A.R.E. X-CROSSOVER INCLUDED IN KIT WITH ROUND -TO-OVAL TRANSISTIONS TO CONNECT TO HEADER COLLECTORS AND MUFFLERS. ALL JOINTS ARE SLIP-FIT. THE TRANSISITIONS ALLOW YOU TO INSTALL THE SYSTEM IN HIGHER PLANE UNDER THE CAR SO YOU GAIN GROUND CLEARANCE 2 WAYS...FROM SHORT VERTICAL PROFILE OF OVAL TUBE AND BY TIGHT FIT TO UNDERCARRIAGE. (click on photo to see comparitive difference of 3.5 oval and round tubes)

    KIT INCLUDES HEADER FLANGES&GASKETS AND INSTRUCTIONS.

    CHOOSE 3.0" OR 3.5" CROSSOVER KIT Learn More

9 Item(s)

per page

Grid  List 

Set Ascending Direction