Suspension Improvement

Suspension Improvement

Items 1 to 10 of 30 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction
  1. DSL-3 No Weld / No Drill driveshaft loop--Powerglide and Turbo 700R4 & 4LE transmissions

    DSL-3 No Weld / No Drill driveshaft loop--Powerglide and Turbo 700R4 & 4LE transmissions

    $89.00

    Protect your musclecar from damage resulting from broken U-joint or broken trans yoke. This is an easy addition with no welding or drilling...bolt to trans mount and fits in your trans tunnel. Some tunnels are tight fit and may require redrilling for best fit. Fits all GM A, B, F & G bodies(ie. Chevelle/GTO/442, Catalina/Caprice, FB/Camaro, GrandPrix/MonteCarlo

    Tough black powdercoated finish Learn More

  2. Subframe Connector Kits

    Subframe Connector Kits

    $229.00

    Our subframe connector kits are precision formed to ensure excellent fit with the undercarriage of your car and are compatable with stock exhaust/fuel line/brake line pathing.

    All install hardware (grade 8) is included; these can be welded as well! Connectors are provided with tough black powdercoated finish. Instructions included. Solid body bushings are recommended for first and second gen applications. Our bushing kits are listed in this category. Learn More

  3. DSL-2 No Weld / No Drill driveshaft loop--Turbo 350 & 4 speed vehicles

    DSL-2 No Weld / No Drill driveshaft loop--Turbo 350 & 4 speed vehicles

    $89.00

    Protect your musclecar from damage resulting from broken U-joint or broken trans yoke. This is an easy addition with no welding or drilling...bolt to trans mount and fits in your trans tunnel. Some tunnels are tight fit and require bending the stem of loop and/or applying rubber to floor pan to prevent contact. Fits all GM A, B, F & G bodies(ie. Chevelle/GTO/442, Catalina/Caprice, FB/Camaro, GrandPrix/MonteCarlo

    Tough black powdercoated finish. Learn More

  4. DSL-1 No Weld / No Drill driveshaft loop--Turbo 400 vehicles

    DSL-1 No Weld / No Drill driveshaft loop--Turbo 400 vehicles

    $79.00

    Protect your musclecar from damage resulting from broken U-joint or broken trans yoke. This is an easy addition with no welding or drilling...bolt to trans mount and fits in your trans tunnel. Fits all GM A, B, F & G bodies(ie. Chevelle/GTO/442, Catalina/Caprice, FB/Camaro, GrandPrix/MonteCarlo

    Tough black powdercoated finish. Learn More

  5. F-BODY ADJUSTABLE TORQUE ARMS

    F-BODY ADJUSTABLE TORQUE ARMS

    $329.00

    Our Bolt-on torque arm improves traction and increases acceleration and deceleration stability. Adjustment feature allows you to adjust pinion angle. Steel plate cradle fits snugly into trans tunnel and replaces factory rubber mount. At the strip, these should result in marked improvement in 60' times.

    Two versions: 82-92 Camaro/Firebird and 93-02 Camaro/Firebird...specify year in order comments

    tough black powdercoat finish Learn More

  6. A01-001  F-Body Rear Sway Bar Mounts

    A01-001 F-Body Rear Sway Bar Mounts

    $133.00

    Super duty rear sway bar mounts kit with rear mounting links, polyurethane bushings and mounting hardware. For 3/4", 7/8" and 1" sway bar applications... State your bar diameter in order comments. Fits 70-81 Camaro & Firebird. Black powdercoat finish. Learn More
  7. A01-841 F-BODY FRONT SWAY BAR BRACE

    A01-841 F-BODY FRONT SWAY BAR BRACE

    $89.00

    FRONT SWAY BAR BRACE ADDS RIGIDITY TO FRONT FRAME RAILS THRU UN-EQUAL FORCES LOADED ON THE FRONT END THRU AGGRESSIVE HANDLING. SIMPLE INSTALL...THIS BRACE MOUNTS ABOVE THE SWAY BAR IN THE SAME MOUNTING HOLES. BLACK POWDERCOAT FINISH.

    STATE YEAR MODEL WHEN ORDERING. FITS 70-81 CAMARO & FIREBIRD. Learn More

  8. A01-077 67-81 CAMARO/FIREBIRD TIE-ROD SLEEVES

    A01-077 67-81 CAMARO/FIREBIRD TIE-ROD SLEEVES

    $69.00

    PAIR, SUPER DUTY TIE-ROD SLEEVES AND NUTS. RIGID AND SEAMLESS TIE-ROD SLEEVES. NOT ONLY INCREASE RELIABILITY OVER STAMPED OEM STYLE SLEEVES BUT ADDS A SMOOTH/CLEAN LOOK TO WHAT USUALLY APPREARS ROUGH. Learn More
  9. A01-840 STRONG-ARM F-BODY (FIREBIRD, CAMARO)  1.25" FRONT STABILIZER BAR KIT

    A01-840 STRONG-ARM F-BODY (FIREBIRD, CAMARO) 1.25" FRONT STABILIZER BAR KIT

    $189.00

    NEW! 1.25" diameter front stabilizer bar for all second gen (70-81) Firebird, TAs and Camaros. Stronger bar than stock and comes complete with polyurethane mounting bushings and polyurethane/grade 8 link kits. Stabilizer bar finish is low gloss black powdercoat. Learn More
  10. A01-839  STRONG-ARM A-BODY (GTO, 442, CHEVELLE, GS) 1.25" FR STABILIZER BAR KIT

    A01-839 STRONG-ARM A-BODY (GTO, 442, CHEVELLE, GS) 1.25" FR STABILIZER BAR KIT

    $189.00

    NEW! 1.25" diameter front stabilizer bar for all GM A-body vehicles, 1964-1972. Stronger bar than stock and comes complete with polyurethane mounting bushings and polyurethane/grade 8 link kits. Stabilizer bar finish is low gloss black powdercoat. Learn More

Items 1 to 10 of 30 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction