Chevy

Items 31 to 40 of 81 total

per page
Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6

Grid  List 

Set Ascending Direction
  1. A01-002 POLYURETHANE REAR AXLE BUSHINGS FOR GM CARS

    A01-002 POLYURETHANE REAR AXLE BUSHINGS FOR GM CARS

    $29.90

    PAIR OF ENERGY SUSPENSION BRAND POLY REAR AXLE BUSHINGS FOR GM CARS. THESE BUSHING INSTALL IN THE REAR END UPPER LOCATIONS FOR ALL 10 AND 12 BOLT HOUSINGS FOR 65-72 GTO/CHEVELLE/442, 69-72 GRAND PRIX AND 69-70 B-BODY (CAT/BONNE) USE ONE PAIR.

    65-68 B-BODY USE 2 PAIR BUSHINGS.

    ALL BUSHINGS COME WITH THRUST WASHERS TO PREVENT "CONTROL ARM WALK." Learn More

  2. A-014 64-72 GTO/CHEVELLE/442/GS TUBULAR FRONT SUSPENSION

    A-014 64-72 GTO/CHEVELLE/442/GS TUBULAR FRONT SUSPENSION

    $995.00

    High strength tubular front control arms for 64-72 GM a-body with standard spring style. Made from DOM tubing with strength reinforcements on lowers. Lower arms configured with caster improvement to increase stability and road-feel. Billet cross-shafts provide stock or additional camber gain. Includes ball joints, EnergySuspension poly bushings and heim-joint sway bar links. Black powdercoated and fully assembled.

    To upgrade to spherical bearings in place of the lower bushings order AU-01, quantity 2. Learn More

  3. A-064 GM-A body (GTO, Chevelle, Olds 442) Tubular Front Suspension w/Coil Over shocks

    A-064 GM-A body (GTO, Chevelle, Olds 442) Tubular Front Suspension w/Coil Over shocks

    $1,449.00

    New front control arm+coil over kit for all GM A-body (Lemans, GTO, Cutlass, Chevelle, 69-72 Grand Prix) Made from high strength DOM tubular steel with Energy Suspension poly-bushings..all grease-able, ball joints and attaching hardware. QA1 ProCoil adjustable valving coil over shocks and springs. A simple twist-of-the-knob and you can adjust compression and rebound valving on each shock to 10 different settings. You must specify your year/model, engine and engine accessories in order comments so we can provide correct springs. Stock or aftermarket sway bar works fine with these. Upper control arm cross-shafts have stock config or "Additional Camber" config for improving built-in camber. Learn More
  4. A01-839  STRONG-ARM A-BODY (GTO, 442, CHEVELLE, GS) 1.25" FR STABILIZER BAR KIT

    A01-839 STRONG-ARM A-BODY (GTO, 442, CHEVELLE, GS) 1.25" FR STABILIZER BAR KIT

    $189.00

    NEW! 1.25" diameter front stabilizer bar for all GM A-body vehicles, 1964-1972. Stronger bar than stock and comes complete with polyurethane mounting bushings and polyurethane/grade 8 link kits. Stabilizer bar finish is low gloss black powdercoat. Learn More
  5. A01-840 STRONG-ARM F-BODY (FIREBIRD, CAMARO)  1.25" FRONT STABILIZER BAR KIT

    A01-840 STRONG-ARM F-BODY (FIREBIRD, CAMARO) 1.25" FRONT STABILIZER BAR KIT

    $189.00

    NEW! 1.25" diameter front stabilizer bar for all second gen (70-81) Firebird, TAs and Camaros. Stronger bar than stock and comes complete with polyurethane mounting bushings and polyurethane/grade 8 link kits. Stabilizer bar finish is low gloss black powdercoat. Learn More
  6. A01-077 67-81 CAMARO/FIREBIRD TIE-ROD SLEEVES

    A01-077 67-81 CAMARO/FIREBIRD TIE-ROD SLEEVES

    $69.00

    PAIR, SUPER DUTY TIE-ROD SLEEVES AND NUTS. RIGID AND SEAMLESS TIE-ROD SLEEVES. NOT ONLY INCREASE RELIABILITY OVER STAMPED OEM STYLE SLEEVES BUT ADDS A SMOOTH/CLEAN LOOK TO WHAT USUALLY APPREARS ROUGH. Learn More
  7. A01-841 F-BODY FRONT SWAY BAR BRACE

    A01-841 F-BODY FRONT SWAY BAR BRACE

    $89.00

    FRONT SWAY BAR BRACE ADDS RIGIDITY TO FRONT FRAME RAILS THRU UN-EQUAL FORCES LOADED ON THE FRONT END THRU AGGRESSIVE HANDLING. SIMPLE INSTALL...THIS BRACE MOUNTS ABOVE THE SWAY BAR IN THE SAME MOUNTING HOLES. BLACK POWDERCOAT FINISH.

    STATE YEAR MODEL WHEN ORDERING. FITS 70-81 CAMARO & FIREBIRD. Learn More

  8. A01-001  F-Body Rear Sway Bar Mounts

    A01-001 F-Body Rear Sway Bar Mounts

    $133.00

    Super duty rear sway bar mounts kit with rear mounting links, polyurethane bushings and mounting hardware. For 3/4", 7/8" and 1" sway bar applications... State your bar diameter in order comments. Fits 70-81 Camaro & Firebird. Black powdercoat finish. Learn More
  9. F-BODY ADJUSTABLE TORQUE ARMS

    F-BODY ADJUSTABLE TORQUE ARMS

    $329.00

    Our Bolt-on torque arm improves traction and increases acceleration and deceleration stability. Adjustment feature allows you to adjust pinion angle. Steel plate cradle fits snugly into trans tunnel and replaces factory rubber mount. At the strip, these should result in marked improvement in 60' times.

    Two versions: 82-92 Camaro/Firebird and 93-02 Camaro/Firebird...specify year in order comments

    tough black powdercoat finish Learn More

  10. A01-034  68-72 A-BODY ADJUSTABLE UPPER CONTROL ARMS

    A01-034 68-72 A-BODY ADJUSTABLE UPPER CONTROL ARMS

    $249.00

    PAIR, ADJUSTABLE UPPER CONTROL ARMS ALLOW FOR EASY PINION ANGLE/SUSPENSION TUNING WITHOUT REMOVING THE CONTROL ARMS. FEATURE HARDENED 4130 ROD ENDS. BLACK POWDERCOAT. Learn More

Items 31 to 40 of 81 total

per page
Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6

Grid  List 

Set Ascending Direction